very fast shipping
Great seller fast shipping. Fantastic product works great every time
Techline™ EZ
Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites. Netafim's Techline™ EZ is the 12mm dripline for on-surface looped systems that installs fast, saves water and "disappears" into the landscape.
Why Techline™ EZ?
The first anti-siphon emitter in Landscape dripline, successfully used in harsh agricultural applications before its introduction into Landscape. The emitter is pressure compensating and continuous flushing, the anti-siphon feature prevents ingestion of debris into the tubing caused by vacuum.
- Laser Etched, For Easy Identification
- Made With Post-Consumer Recycled Material
- Qualifies for Use on Leed Projects
- UV Resistant Tubing
- Self-Contained, One-Piece Dripline Construction
Product Advantages
-
Less Visually Obtrusive
12mm diameter tubing is less noticeable in landscape installations. -
Self-Contained, One-Piece Dripline Construction
Assures reliable, easy installation. -
Flexible UV Resistant Tubing
Adapts to any planting area shape – tubing curves at a 6″ radius. On-surface installations withstand heat and direct sun. -
More Cost-Effective in Smaller Bed Areas
24% smaller diameter tubing.
Applications
- Subsurface or on-surface installations
- Bed areas that require shorter lateral lengths
- Areas subject to vandalism
- Planting areas
- Curved, narrow, and angular planting areas
- Flower beds, trees, and shrubs
- Rooftop gardens
- Vegetable gardens
- Green walls
- High traffic or high liability areas
- Raised planters
Specifications
- Emitter flow rates: 0.26, 0.4, 0.6 and 0.9 GPH
- Emitter spacings: 6″, 12″, and 18″
(6″ available for 0.26 and 0.4 GPH only) - Uses 12mm Netafim Insert Fittings or any compression fitting for 0.426″ diameter tubing
- Pressure compensation range: 6 to 58 psi
- Bending radius: 6″
- Maximum system pressure: 58 psi
- Minimum pressure required: 6 psi
- Tubing diameter: .510″ O.D.; .426″ I.D.
- Coil length: 200′, 250′, 300′, 500′, 1,000′
- Recommended minimum filtration: 120 mesh
- Diaphragm made of silicon′
- ISO 9261 Standard Compliance
| Brand | Netafim |
|---|---|
| SKU | 10051-000011 |
| Weight (lb.) | 12.6000 |
| Prop 65 | false |
| Width (in.) | |
| Height (in.) | |
| Lead Time | 7-10 |
| Length (in.) | |
| Hazardous Material | false |
| UPC | 3661734845076 |
| UL Listed | No |
| ETL Listed | No |
| Irrigation Part Type | Dripline |
| Tubing Diameter | 0.426 in (ID) x 0.510 in (OD) |
| Choose Emitter Spacing | 6 in. |
What type of irrigation setup is Netafim Techline EZ Dripline made for?
Netafim Techline EZ Dripline is a 12mm dripline for on-surface looped systems. The dripline is designed to install fast and disappear into the landscape.
Which fittings work with Netafim Techline EZ Dripline?
Netafim Techline EZ Dripline uses 12mm Netafim insert fittings or any compression fitting for 0.426-inch diameter tubing. The tubing diameter is 0.426 in. ID x 0.510 in. OD.
Can Netafim Techline EZ Dripline be used above ground and in tight planting areas?
Netafim Techline EZ Dripline supports subsurface or on-surface installations and works in curved, narrow, and angular planting areas. The flexible UV-resistant tubing bends to a 6-inch radius and withstands heat and direct sun in on-surface use.
What flow and emitter spacing does this Netafim Techline EZ Dripline listing use?
This Netafim Techline EZ Dripline listing uses .42 GPH flow with 6-inch emitter spacing. The product name and spacing selection identify this coil as the 6-inch version.
What comes with Netafim Techline EZ Dripline?
Netafim Techline EZ Dripline offers one coil and two fittings. The product is positioned for less than one-hour installation.