A complete ClO2 protection system — covering up to 12,000 cu.ft.
The ProKure Starter Pack brings together all three ProKure chlorine dioxide (ClO2) solutions in one case: ProKure V, ProKure G, and ProKure D — sized to cover up to 12,000 cubic feet of grow space. Rather than solving one piece of the problem, the three products are designed to work together to cover surface disinfection, full-room resets, and month-long air quality maintenance — so mold, mildew, and odor pressure get addressed at every stage, not just after they show up.
How the three products work together
ProKure V (Liquid) is the daily driver. It's suitable for use with plants in the room and leaves no residue, so it fits into a regular cleaning routine — spray down non-porous equipment, floors, and up to four feet up the walls without clearing the space out.
ProKure G (Fast-Release Gas) is the deep reset. Used in an unoccupied space, its deep-penetrating ClO2 vapor is the solution to mold and mildew, odor-causing bacteria, and chemical odors that surface cleaning alone can't reach — ideal between cycles or when a problem needs to be knocked down fast.
(not for use in occupied spaces or when plants are present)
ProKure D (Slow-Release Gas) is the maintenance layer in between. It can be used while plants are in the room, providing up to 30 days of ClO2 protection per packet to improve air quality and control ongoing nuisance odors.
Together, that's continuous air quality upkeep (D), regular surface disinfection (V), and a full-room reset on standby (G) whenever it's needed — a complete cycle instead of a single fix.
What's Included
- ProKure D – 10 Gram – Case of 12 Packets (+ 12 reusable Trifolds)
- ProKure G – 10 Gram – Case of 12 Packets (+ 4 reusable Dispersion Cups)
- ProKure V – .042 oz. (32 oz. mixed) – Case of 12 Packets (+ 3 reusable 32 oz. bottles)
Coverage at a Glance
This Starter Pack covers up to 12,000 cu.ft. of space — sized for a single grow room or a smaller multi-room facility, with enough product to run surface treatment, a full-room reset, and a month of air quality maintenance without reordering mid-cycle.
-
ProKure V: each .042 oz. packet mixes into 1 quart of ready-to-use solution — 12 packets gives you 3 gallons of surface treatment, refilled through the included reusable bottles.
-
ProKure G: each 10g packet covers up to 1,000 ft³ — 12 packets gives you multiple full-room resets, or combine packets in a cup for larger spaces.
-
ProKure D: each 10g packet covers up to 1,000 ft³ for up to 30 days — 12 packets supports a rotating replacement schedule (placing a quarter of the packets each week) for continuous air quality protection in a 1,000 ft³ space.
ProKure V — Liquid Mold & Mildew Eliminator
- Kills mold and mildew
- Hospital-type disinfectant
- Kills SARS-CoV-2 on hard, non-porous surfaces in 30 seconds
- Suitable for use with plants in the room
- Leaves no residue
- Apply by mop, sprayer, or sponge; pre-clean visibly soiled surfaces first and ensure visible wetness on the treated surface
ProKure G — Fast-Release Gas
- Cleans the air with deep-penetrating ClO2 vapor
- The solution to mold and mildew, odor-causing bacteria, and chemical odors
- Covers up to 1,000 ft³ per 10g packet
- For unoccupied spaces only — not for use with/on plants, crops, or feed
- Ready to air out in 4–6 hours (max 24); ventilate and run lights for 1 hour before re-entry
ProKure D — Slow-Release Gas
- Improves air quality and controls ongoing nuisance odor
- Provides up to 30 days of ClO2 protection per packet
- Covers up to 1,000 ft³ per 10g packet
- Can be used while plants are in the room
- Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR
Always read the full product label before use. It is a violation of Federal Law to use EPA-registered products in a manner inconsistent with their labeling.