very fast shipping
Great seller fast shipping. Fantastic product works great every time
Techline™ EZ
Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites. Netafim's Techline™ EZ is the 12mm dripline for on-surface looped systems that installs fast, saves water and "disappears" into the landscape.
Why Techline™ EZ?
The first anti-siphon emitter in Landscape dripline, successfully used in harsh agricultural applications before its introduction into Landscape. The emitter is pressure compensating and continuous flushing, the anti-siphon feature prevents ingestion of debris into the tubing caused by vacuum.
- Laser Etched, For Easy Identification
- Made With Post-Consumer Recycled Material
- Qualifies for Use on Leed Projects
- UV Resistant Tubing
- Self-Contained, One-Piece Dripline Construction
Product Advantages
-
Less Visually Obtrusive
12mm diameter tubing is less noticeable in landscape installations. -
Self-Contained, One-Piece Dripline Construction
Assures reliable, easy installation. -
Flexible UV Resistant Tubing
Adapts to any planting area shape – tubing curves at a 6″ radius. On-surface installations withstand heat and direct sun. -
More Cost-Effective in Smaller Bed Areas
24% smaller diameter tubing.
Applications
- Subsurface or on-surface installations
- Bed areas that require shorter lateral lengths
- Areas subject to vandalism
- Planting areas
- Curved, narrow, and angular planting areas
- Flower beds, trees, and shrubs
- Rooftop gardens
- Vegetable gardens
- Green walls
- High traffic or high liability areas
- Raised planters
Specifications
- Emitter flow rates: 0.26, 0.4, 0.6 and 0.9 GPH
- Emitter spacings: 6″, 12″, and 18″
(6″ available for 0.26 and 0.4 GPH only) - Uses 12mm Netafim Insert Fittings or any compression fitting for 0.426″ diameter tubing
- Pressure compensation range: 6 to 58 psi
- Bending radius: 6″
- Maximum system pressure: 58 psi
- Minimum pressure required: 6 psi
- Tubing diameter: .510″ O.D.; .426″ I.D.
- Coil length: 200′, 250′, 300′, 500′, 1,000′
- Recommended minimum filtration: 120 mesh
- Diaphragm made of silicon′
- ISO 9261 Standard Compliance
| Brand | Netafim |
|---|---|
| SKU | 10051-000001 |
| Weight (lb.) | 7.6000 |
| Prop 65 | false |
| Width (in.) | |
| Height (in.) | |
| Lead Time | 3-5 |
| Length (in.) | |
| Hazardous Material | false |
| UPC | 3661734796705 |
| UL Listed | No |
| ETL Listed | No |
| Irrigation Part Type | Dripline |
| Tubing Diameter | 0.426 in (ID) x 0.510 in (OD) |
| Choose Emitter Spacing | 6 in. |
What is Netafim Techline EZ best used for?
Netafim Techline EZ is a 12mm dripline for small and medium areas, especially on-surface looped systems. Netafim Techline EZ installs fast, saves water, and disappears into the landscape.
Can Netafim Techline EZ be installed above ground or below ground?
Netafim Techline EZ supports subsurface or on-surface installations. Netafim Techline EZ uses flexible UV-resistant tubing for installations that face heat and direct sun.
What fittings and tubing size work with Netafim Techline EZ?
Netafim Techline EZ uses 12mm Netafim Insert Fittings or any compression fitting for 0.426-inch diameter tubing. Netafim Techline EZ tubing measures 0.426 in. I.D. by 0.510 in. O.D.
Which planting areas fit Netafim Techline EZ?
Netafim Techline EZ suits curved, narrow, and angular planting areas, plus flower beds, trees, shrubs, rooftop gardens, vegetable gardens, green walls, and raised planters. Netafim Techline EZ also fits high traffic or high liability areas.
How does Netafim Techline EZ handle debris and outdoor wear?
Netafim Techline EZ uses a pressure-compensating, continuous-flushing, anti-siphon emitter. Netafim Techline EZ also has laser-etched identification, self-contained one-piece dripline construction, post-consumer recycled material, and UV-resistant tubing.