very fast shipping
Great seller fast shipping. Fantastic product works great every time
Techline™ EZ
Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites. Netafim's Techline™ EZ is the 12mm dripline for on-surface looped systems that installs fast, saves water and "disappears" into the landscape.
Why Techline™ EZ?
The first anti-siphon emitter in Landscape dripline, successfully used in harsh agricultural applications before its introduction into Landscape. The emitter is pressure compensating and continuous flushing, the anti-siphon feature prevents ingestion of debris into the tubing caused by vacuum.
- Laser Etched, For Easy Identification
- Made With Post-Consumer Recycled Material
- Qualifies for Use on Leed Projects
- UV Resistant Tubing
- Self-Contained, One-Piece Dripline Construction
Product Advantages
-
Less Visually Obtrusive
12mm diameter tubing is less noticeable in landscape installations. -
Self-Contained, One-Piece Dripline Construction
Assures reliable, easy installation. -
Flexible UV Resistant Tubing
Adapts to any planting area shape – tubing curves at a 6″ radius. On-surface installations withstand heat and direct sun. -
More Cost-Effective in Smaller Bed Areas
24% smaller diameter tubing.
Applications
- Subsurface or on-surface installations
- Bed areas that require shorter lateral lengths
- Areas subject to vandalism
- Planting areas
- Curved, narrow, and angular planting areas
- Flower beds, trees, and shrubs
- Rooftop gardens
- Vegetable gardens
- Green walls
- High traffic or high liability areas
- Raised planters
Specifications
- Emitter flow rates: 0.26, 0.4, 0.6 and 0.9 GPH
- Emitter spacings: 6″, 12″, and 18″
(6″ available for 0.26 and 0.4 GPH only) - Uses 12mm Netafim Insert Fittings or any compression fitting for 0.426″ diameter tubing
- Pressure compensation range: 6 to 58 psi
- Bending radius: 6″
- Maximum system pressure: 58 psi
- Minimum pressure required: 6 psi
- Tubing diameter: .510″ O.D.; .426″ I.D.
- Coil length: 200′, 250′, 300′, 500′, 1,000′
- Recommended minimum filtration: 120 mesh
- Diaphragm made of silicon′
- ISO 9261 Standard Compliance
| Brand | Netafim |
|---|---|
| SKU | 10051-000003 |
| Weight (lb.) | 25.3000 |
| Prop 65 | false |
| Width (in.) | |
| Height (in.) | |
| Lead Time | 10-14 |
| Length (in.) | |
| Hazardous Material | false |
| UPC | 3661734812436 |
| UL Listed | No |
| ETL Listed | No |
| Irrigation Part Type | Dripline |
| Tubing Diameter | 0.426 in (ID) x 0.510 in (OD) |
| Choose Emitter Spacing | 6 in. |
What kind of irrigation setup is Netafim Techline EZ made for?
Netafim Techline EZ is a 12mm dripline for on-surface looped systems. Netafim describes Netafim Techline EZ as a simple solution for small sites and small to medium areas.
Can Netafim Techline EZ be used on-surface and subsurface?
Netafim Techline EZ supports both subsurface and on-surface installations. The UV-resistant tubing is designed to handle heat and direct sun in on-surface use.
What fittings and tubing does Netafim Techline EZ use?
Netafim Techline EZ uses 12mm Netafim Insert Fittings or any compression fitting for 0.426-inch diameter tubing. Netafim Techline EZ tubing measures 0.426 in ID x 0.510 in OD.
Which emitter spacing does Netafim Techline EZ use?
Netafim Techline EZ in 6-inch emitter spacing is available for the 0.26 GPH and 0.4 GPH flow rates. The dripline uses pressure-compensating, continuous-flushing emitters.
Which planting areas can Netafim Techline EZ handle?
Netafim Techline EZ works in curved, narrow, and angular planting areas, along with flower beds, trees, shrubs, rooftop gardens, vegetable gardens, green walls, and raised planters.