The only convertible cabinet heater that can be installed either vertically or horizontally on the market. This narrow profile heater is only 3-5/8" tall and specifically designed to fit into kitchen or bathroom cabinets, providing warm comfortable
air for a cold bathrooms or kitchens saving valuable floor and wall space. For application other than kickspace, use the KTW-TG Grill.
Often-overlooked, Kickpace heaters deliver the best of both worlds. Cost-effective heating in a compact package. Their modest size means that in a room with a challenging layout, one that would not accommodate a baseboard heater, a Kickspace heater may be able to fit in seamlessly, installed at floor level beneath cabinetry or even inside the wall.
With its narrow 3-1/2" profile the KT Kickspace heater easily fits out of the way, under cabinets providing warm air for cold bathrooms and kitchens.
Featuring a maintenance free blower, an insulated cabinet for quiet operation, and heavy gauge coiled nickel-chromium wire heating elements, the KFS furnace will provide years of trouble-free operation.
The King Electric KT Multiwatt Kick Space Heater Features:
Installs Vertically or Horizontally
Multiple wattage options, to tailor to a room's specific heating requirements
NiChrome Open Coil Element For Quick Heat Transfer
Squirrel Cage Blower
Patented Smart Limit Protection
Available in Black, Almond, White or Stainless Finishes
Proudly made in the USA
2-year warranty
The King Electric King Electric KT Multiwatt Kick Space Heater Engineering Specs:
Construction:
Ratings:
Heaters shall be available in wattages of 250 to 1,500 at 120 volts or dual rated from 208 volts to 240 volts.
Blower and Motor:
A tangential cylindrical blower, delivering 70 CFM, shall be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings. Motors shall be the same voltage as the heater.
Elements:
Element assemblies shall have a 3-wattage element construction of coiled nickel chromium, alloy corrosion resistant wire strung with a minimum of two rows of muscovite insulator. Element assemblies shall have factory provided connection to allow field modification of wattage at time of installation.
Thermal Overload:
Heaters shall be equipped with King's patented thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceeded. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for fifteen minutes. Automatic reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be accepted.
Hi/Lo Selector Switch:
Wattage can be adjusted from 250-1250 watts in the low position and 750-1500 watts in the hi position (HLS Optional).
Wall Can:
The wall can shall be 20-gauge steel and shall contain two 1/2" knockouts for power leads. The wall can shall be supplied with a factory installed grounding wire.
Grill:
The grill shall be louvered, one piece design. The grill shall be epoxy powder coated in the color specified on the plans or stainless steel.
I have about 200 of these in our building. They are solid in all kinds of conditions, including the high-humidity environments that most of them live in. In fact, I just learned that most of the employees just wash them with the power washer (they do unplug them first)! I've never had a problem with any of them, except that the departments tend to steal them from each other for their own purposes.
I'll probably come back to Hydrobuilder for more as long as the price is right! At least until I have enough that they stop stealing from each other.
This sett up is great relatively easy compared to all the other methods I've use over the last 40 years at my age simple and easy with great results is where it's at