GMP Solutions Step 1 Cleaner Concentrate, 1 Gallon, Case of 4

GMP Solutions Alkaline Cleaner

Step 1 Cleaner is safe and effective for cleaning virtually all food, and pharmaceutical manufacturing equipment. Our alkaline cleaners are effective on tough soils and buildups and easily integrated into any GMP cleaning validation protocol. Concentrates can be diluted with up to 15 parts water to one part cleaning solution. This powerful detergent loosens stubborn resins, organics, greases, and oil accumulations while penetrating gums and dyes for a thorough clean.

The 1-Gallon and 55-Gallon containers are concentrated and need to be diluted

*1-Gallon bottle comes in a case of 4 bottles

Features & Benefits

Alkaline cleaners are used for deep cleaning greases, dirt, organic residues, dark marks, and oxidation. Our alkaline cleaner is food safe and can be used on processing equipment in GMP-certified workflows.

• GMP-Compatible
• Non-Toxic
• Biodegradable
• Food-Safe

What surfaces are Alkaline Cleaners safe on?

Typical alkaline cleaners are safe on metals like stainless steel but should not be applied to surface treatments like anodized aluminum. Step 1 Cleaner is different – the product formulation includes a buffering agent that enables it to behave towards target material surfaces as a neutral solution, making it safe to use on virtually all metals, plastics and rubbers.

Step 1 Cleaner can be used on equipment and parts used in the manufacturing and packaging of food, and pharmaceuticals.

How do I use Step 1 Cleaner?

Start by rinsing the surface with warm or hot water. Apply Step 1 Cleaner and let sit for 1-5 minutes. You may use a plastic razor, soft-bristled brush, or cloth to help remove tougher soils. Finish by rinsing with warm or hot water.

This 32 oz. bottle is Ready To Use and does not need to be diluted. The 1-Gallon and 55-Gallon are a concentrate and will need to be diluted first

Directions & Dilution Chart

Refer to the dilution chart for more information about cleaning parts and equipment.

• 1. Pre-rinse with warm or hot water to remove any loose buildup
• 2. Apply Step 1 Cleaner and allow it to penetrate the target buildup for 10 - 15 minutes.
• 3. For surfaces with thicker buildups, try a plastic razor, soft-bristled brush, or cloth to help remove the soil.
• 4. Finish by rinsing with warm or hot water. For stubborn buildups, repeat the cleaning steps, targeting the problem area(s) until the soil is fully removed.

• Tough Buildups: 2 parts Water | 1 part Concentrate
• General Cleaning: 5 parts Water | 1 part Concentrate
• Equipment Foaming: 10 parts water | 1 part Concentrate
• Overnight Soak: 15 parts Water | 1 part Cocentrate