FloraPro Powder by General Hydroponics is a water-soluble, base program built for continuous liquid-feed at commercial scale. These formulas are highly soluble for clean injector and day-tank use, formulated with quality inputs and lot-tested to label guarantees. No fillers. No dyes. Just the essentials—balanced, repeatable, and easy to deploy in any modern hydroponic workflow.
FloraPro FUL+, part of the FloraPro Liquid line, is a proprietary supplement intended to help aid in resin, flavonoid, and terpene biosynthesis. By working in tandem with base nutrition programs, FUL+ supports the plant’s ability to express its genetic potential. Because FUL+ is a complex, proprietary formulation, TrueFlo is a required system component to ensure operational reliability and clean-running standards at scale.
Lo-Flo Panel Configuration w/ FUL+
LO-FLO rated for 0.05 – 14 GPM or 4.3 – 85 PSI. Configurations are recommendations and to be used as reference for dosing FloraPro
Tag
Qty
Part Number
Description
A
1
HYKSTART-STD
Lo-Flo 3/4″ Standard Starter Kit
*B
3
(x2) D14MZ3000VFBPHY
(x1) D14MZ3000AFBPHY
14 GPM Dosing Pump 1.25 – 11 mL
C
5
HYKMC34
Lo-Flo 3/4″ Mixing Chamber Kit
D
3
D14MZ1000BPVFHY
14 GPM Dosing Pump 3.75 – 37.5 mL
E
1
HYKMON
Lo-Flo 3/4″ Monitor Kit
F
1
WHA34-SS-KIT
Water Hammer Arrestor Kit
*SEAL OPTIONS
Viton Seals (VF) For products with neutral to acidic pH. (pH Down, FUL+ & TrueFlo)
Aflas Seals (AF) For products with a higher than neutral to alkaline pH. (Silicates & pH Up)
Hi-Flo Panel Configuration w/ FUL+
HI-FLO rated for 2.2 – 40 GPM or 4.3 – 116 PSI. Configurations are recommendations and to be used as reference for dosing FloraPro
Tag
Qty
Part Number
Description
A
1
HYKSTART150
Hi-Flo 1 1/2″ Starter Kit
*B
3
(x2) D40MZ3000BPVFHY
(x1) D40MZ3000BPAFHY
40 GPM Dosing Pump 1.25 – 7.5 mL
C
5
HYKMC150
Hi-Flo 1 1/2″ Mixing Chamber Kit
D
3
D40MZ1000BPVFHY
40 GPM Dosing Pump 3.75 – 37.5 mL
E
1
HYKMON150
Hi-Flo 1 1/2″ Monitor Kit
F
1
WHA150-SS-KIT
Water Hammer Arrestor Kit
*SEAL OPTIONS
Viton Seals (VF) For products with neutral to acidic pH. (pH Down, FUL+ & TrueFlo)
Aflas Seals (AF) For products with a higher than neutral to alkaline pH. (Silicates & pH Up)
When it comes to nutrients, more is not always better. Plant nutrition is all about balance. Minerals must be properly proportioned for plants to use them effectively. And not all plants require the same proportions.
FloraPro is specially formulated for high-value production crops where results and consistency are paramount. Our unique formulation and methodology produce superior results in large-scale operations. Designed from the ground up for fertilizer injection systems, FloraPro is easy to use and highly water-soluble. Our complete and balanced formula is cost-effective, scalable, and consistent to meet the high standards of a competitive industry.
FloraPro is a two-stage system, containing three products. During each growth phase — vegetative and flowering — you will use two of the three FloraPro products. During the vegetative stage, use FloraPro Grow and FloraPro Ca + Micros to build strong roots, stems, and leaves. Then, during the bloom cycle, use both FloraPro Bloom and FloraPro Ca + Micros to supply plants with the specific nutrients they require to grow large fruits and flowers. With these combinations, you can help deliver the precise nutrient ratios commercial plants like microgreens, and culinary and aromatherapeutic herbs crave.
We don't have a video for this product yet. Questions? Our grow experts are here to help: 888-815-9763.
What is included in the Hi-Flo NDS Kit for your nutrient line?
This kit includes the dosers, mixing chambers, monitor kit, and fittings needed to build a complete Hi-Flo Nutrient Delivery System configured specifically for your nutrient line's recipe structure — with dosers pre-matched to the number of parts in that nutrient line.
Why is this kit specific to your nutrient line rather than a generic kit?
Injection rates are matched to your nutrient line's recommended dosage per part, so the doser selection and mixing chamber count are tuned to deliver that nutrient line's recipe accurately without manual rate calculation.
Can I add pH correction to this system later?
Yes. An additional doser for pH-up or pH-down can be added to the line, or the system can be upgraded later with an Editron and flow sensor for automated pH correction if paired with a DS Controller.
I have about 200 of these in our building. They are solid in all kinds of conditions, including the high-humidity environments that most of them live in. In fact, I just learned that most of the employees just wash them with the power washer (they do unplug them first)! I've never had a problem with any of them, except that the departments tend to steal them from each other for their own purposes.
I'll probably come back to Hydrobuilder for more as long as the price is right! At least until I have enough that they stop stealing from each other.
This sett up is great relatively easy compared to all the other methods I've use over the last 40 years at my age simple and easy with great results is where it's at