NeutraFog Product Documents
**Please Note** This is a final sale item, no warranty or returns permitted.
The T-Series foggers feature a patented high pressure pump and “LAYER” technology for heating exchange systems. In the past, growers had crews which required large amounts of time to perform their services. Not only are these services expensive, but downtime equals loss in revenue... until now !
NeutraFog equipment provides a number of benefits over spray applications or hand-picking pests. They remove the labour required to apply biocides using a standalone spray unit or built-in system. Our Foggers also provide a smaller and more consistent droplet size which provides better surface contact time, coverage and efficacy whilst minimizing waste.
Our proprietary products and nutrients can be applied through our PRO & T-Series Fogging range, they work through our patented application which produces a dense dry fog with an efficiency of over 2000 times higher than a conventional mister or sprayer it therefore does not discriminate against any type of pests targeted but also captures every micro particulate present in the air column and plant surface treated.
When you fully understand how our units work, rapid pest & nutrient control costs equate to fractions in comparison to conventional methods. This is absolutely unrivaled in this space and only a small percentage of what conventional working crews cost.
Dry fog describes anything that’s 1-10 microns in droplet size. The size is small enough that the fog appears “dry”. When you fog your room, the droplets are so small that it raise humidity like a mist or spray would. It also lets you get complete coverage with no residue (depending on the solution you fog with).
The T-250 is perfect for flower or veg rooms up to 50 000 ft³ in 25 seconds. It is ideal system for small/medium flower or veg rooms
The T-500 is a powerful and fast fogging system, which can cover up to 100,000 ft³ in 30 seconds, ideal for larger applications such as entry level greenhouses, which often require extensive manpower and time to apply the product.
Both units ship with two reusable solution bags, with enough solution to get your product set up with a first run. It is suggested that 6 gallons of the wetting agent is initially purchased so you can dial in your machine. This ensures you can dial in your machine exactly how you need, without leaving you high and dry until you resupply.
Fluid bags are easily replaced and at a very competitive rate!
Reduced Power Consumption
The perfect thermal insulation allows reduction of power consuption and also saves energy. These machines are efficient from it's electricity intake to it's fog output!
Specially Formulated Base Fluid
Our specially formulated base fluid has the required precentage surfactant/wetting agent, which ensures an extremely dense fog and the perfect surface area coverage.
Remote Access
Exclusive patented system that allows automatic detection if the nozzle has been obstructed by sending a signal in case of tampering.
GENERAL T-250 SPECS
- Weight of the fog machine: About 30 lbs
- Weight with packaging: About 33 lbs
- Unites on one pallet 100 x 120: 24 units
- Dimension of the machine: 8 x 10 x17 inches
- Dimension of the packaging: 10 x 15 x 21 inches
- Color: Graphite/Black
- Initial warm-up: About 90 minutes
- Vertical mounting: Yes
- Horizontal mounting: Yes
- Wifi Board Included: Yes - Standard
FOG GENERATOR
- Coverage in a single shot: Up to 50 000 ft³ ( Light Fog )
- Max seconds of fog emission: 25 sec
- Fluid Bag Capacity: 1 x 42 fl. oz
- Max fog generated with full fluid bag: 300 000 ft³
- Shot: Programmable in seconds
- Manual operation standard
ELECTRICAL SPECIFICATION
- Power supply: 110v
- Average power consumption: 37w
- Power supply: Yes
SYSTEM REQUIREMENTS
- Windows 10 Home PC
- Ethernet Port
- WiFi Router 2.4 GHz
- Ethernet Cord
- Screwdriver
GENERAL T-500 SPECS
- Weight of the fog machine: About 35 lbs
- Weight with packaging: About 37 lbs
- Unites on one pallet 100 x 120: 24 units
- Dimension of the machine: 8 x 10 x H 17
- Dimension of the packaging: 12 x 15 x H 21
- Colors: Graphite/Black
- Heat up time from cold: About 90 minutes
- Vertical mounting: Yes
- Horizontal mounting: Yes
- Wifi Board Included: Yes - Standard
FOG GENERATOR
- New heating system: Yes
- Coverage in a single shot: Up to 100,000 ft³
- Max seconds of fog emission: 30 sec
- Max fog generated with full fluid bag: 300,000 ft³
- Fluid Bag Capacity: 1 x 42 fl. oz
- Shot: Programmable in seconds
- Manual operation standard
ELECTRICAL SPECIFICATION
- Power supply: 110v
- Average power consumption: 42w
- Power supply: Yes
SYSTEM REQUIREMENTS
- Windows 10 Home PC
- Ethernet Port
- WiFi Router 2.4 GHz
- Ethernet Cord
- Screwdriver
Which NeutraFog Machine is best for you?
P-1500
- Covers Up To 300,000 sq. ft. With a Single Shot
- 70 Seconds Of Fog Emission
- Total Emissions With Full Bag: 300,000 sq. ft.
- About 2 Hour Heat Up Time From Cold
- Fog Tank Capacity: 42 fl. oz. bag
- Heater Cartridge: 600w
- Machine Weight: 63 lbs
P-4000
- Covers Up To 850,000 sq. ft. With a Single Shot
- 180 Seconds Of Fog Emission
- Total Emissions With Full Bag: 850,00 sq. ft.
- About 6 Hour Heat Up Time From Cold
- Fog Tank Capacity: 1 Gallon
- Heater Cartridge: 600w
- Machine Weight: 130 lbs
T-250
- Covers Up To 50,000 sq. ft. With a Single Shot
- 25 Seconds Of Fog Emission
- Total Emissions With Full Bag: 300,000 sq. ft.
- About 90 Minute Heat Up Time From Cold
- Fog Tank Capacity: 42 fl. oz. Bag
- Heater Cartridge: 300w
- Machine Weight: 30 lbs
T-500
- Covers Up To 100,000 sq. ft. With a Single Shot
- 30 Seconds Of Fog Emission
- Total Emissions With Full Bag: 300,000 sq. ft.
- About 70 Minute Heat Up Time From Cold
- Fog Tank Capacity: 42 fl. oz. Bag
- Heater Cartridge: 300w
- Machine Weight: 35 lbs
Brand | NeutraFog |
---|---|
SKU | NF-TSERIES |
Hazardous Material |
NeutraFog T-Series Fogger Machine Questions & Answers
Q. Can I access the machine remotely?
A. With wifi integration our units are accessible remotely from a mobile phone , laptop, Pc or tablet providing with complete control of your IPM.
Q. How effective is the fog?
A. Our fogging application covers both the top and bottom surfaces of plant leaves, unlike most sprayers, reducing the amount of untreated foliage left to harbor and feed pests. Foggers are considered an excellent way to apply many natural pesticides, such as sugar esters and nicotine derivatives, according to the U.S. Department of Agriculture's Agricultural Research Service.
Q. Can we use the product in a green house?
A. Controlling pests in a greenhouse can be extremely difficult. Even if your greenhouse is small, the density of vegetation and the structure itself can provide many places for unwanted organisms to hide and breed. While hand-picking and cultural controls are the most desirable option, it can sometimes be necessary to apply pesticides in a greenhouse setting. Our rang of thermal fogging solutions provide the most effective and convenient way to accomplish this.
Q. How long do I let the fog hang in the room?
A. To eliminate all the micro particulates in the air column and on crop surfaces , you simply apply on of our specially formulated products through our Pro & T-Series foggers. A few minutes after applying the biocide , you may proceed with ventilating the greenhouse until the fog emitted is completely dispersed. At this point the air column and crops will be completely pest free.
Q. Can I use the device for any crop?
A. Neutrafog is a dry fog and safe to use on all crops and organic matter which leaves no visible residue.
Q. Is the Fogger portable?
A. We at NeutraFog recommend that the units are mounted statically for the best results in your IPM. Various options are available for portability . Please contact us to discuss further.