Picked up a used Twister T6 for $400 and replaced the gear box for $100 and now its like new again.
Hydro Logic Product Documents
HyperLogic 20" 5 Micron, Melt-Blown Polypropylene, Ultra-Fine Sediment Filter
Removes silt, rust, dirt and other assorted suspended solids from the water. When used on our Commercial Series RO systems, located in the gray housing under the RO, offer OEM level protection to costly equipment such as the RO pump and help extend the life of RO membranes. Replacement should be perfomed monthly; sooner if Filter In-Filter Out delta exceeds 10%. These Sediment Filters are also commonly used on our Industrial and Heavy-Industrial RO systems with our CIP (clean in place) units by capturing the removed membrane scale build-up.
Replace these filters after each CIP operational run.
Formerly HyperLogic HL 11620
| Brand | Hydro Logic |
|---|---|
| SKU | HGC741672 |
| Weight (lb.) | 2.0000 |
| Height (in.) | |
| Width (in.) | |
| Length (in.) | |
| Lead Time | 2-3 |
| Shipping Restrictions | AK, HI |
| UPC | 812111016005 |
| Prop 65 | false |
What does the Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter remove from water?
The Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter removes silt, rust, dirt, and other suspended solids from water.
Which RO systems use the Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter?
The Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter is used with Commercial Series RO systems and with Industrial and Heavy-Industrial RO systems equipped with CIP units.
How does the Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter protect an RO system?
The Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter provides pre-filtration protection for RO pumps and membranes by capturing suspended solids and removed membrane scale buildup.
How often should the Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter be replaced?
The Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter should be replaced monthly, sooner when filter-in to filter-out delta exceeds 10 percent, and after every CIP operational run.
What size is the Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter for system fit?
The Hydro Logic Hyper-Logic Poly Spun Sediment Pre-Filter measures 20 inches long and 4.5 inches in diameter.