Myco Jordan is a wettable powder containing 100% organic endomycorrhizal fungi at superior concentrations of the purest viable spores used as a soil drench or seed/root inoculant. These fungi attach and construct a vast colonization of symbiotic associations inside and outside plant roots that are actually extensions (absorbent fibers) of the root zone forming thousands of access points which significantly enhance water and nutrient availability and absorption; which will promote profound plant vigor, optimized root growth, enhanced crop quality and increased yields
Avaiable Sizes
Contains non-plant food ingredients
Designed for use in Soil, Coco and Hydroponics.
Start by pre-mixing the product with a small amount of water and gradually mix in more water until the desired dilution rate is attained. Add to reservoir. Keep agitated throughout application. This will keep the mycorrhizal fungi in suspension for equal distribution when applying as a root drench.
Seed treatment: Lightly dust each seed prior to planting.
Cuttings: Add 1-2 teaspoon(s) per gallon of water. Pre-soak starter grow medium up to 15 min prior to placing new cuttings.
Transplanting small plants: Lightly dust each plant site with 1-2 teaspoon(s) around the root zone or directly on the plant roots. Make sure the roots are in direct physical contact with the powder inoculum
Amedning: Mix thoroughly 1-3 oz. with 2.5 cu.ft. of growing substrate.
Slurry Tech: Mix 1/4LB to 1.1LB(s) MJ with 300ML – 1 liter RO water. However, the concentration of spores with MJ and your desired consistency of the slurry depends on how you like it to be, free flowing or on the thicker side. Mix the slurry very well each time(spores will settle if no consistent water movement) prior to dunking/swiping the root zone a quarter inch to a half inch of the rockwool/starter cubes. Use this method and place your cuttings back in the tray/insert for 48-72 hours. After you have transplanted all your cuttings, dilute the remaining slurry with more water and apply generously to the grow medium.
Established Plants in Soil & Coco: Add 1-2 tablespoon(s) per gallon of water. Pour solution around the base of each plant site. Apply once up to 3 times a week until the 2nd or 3rd week of flower.
Hydroponics & Irrigation: Add 1/2 – 1 cup per 50 gallons of water. NOTE: Remove filters and use nozzles with a minimum of 18 mesh (1 mm) openings to avoid clogging. Apply once a week or with every nutrient change out until the 2nd or 3rd week of flower.
Notes: Usually one treatment with MYCO JORDAN™ as a root drench for established plants in Soil & Coco at an application rate of 1-2 tablespoon(s) per gallon of water will provide sufficient root inoculation for the entire crops life cycle
Notes: Some commercial fertilizers and/or mineral salts may be detrimental to the spores.
| Brand | Elite 91 |
|---|---|
| SKU | E91-MJ-2LB |
| Weight (lb.) | 2.2500 |
| Height (in.) | |
| Width (in.) | |
| Length (in.) | |
| Hazardous Material | false |
| UPC | 643462165759 |
| Lead Time | 2-3 |
| Nutrient Application | Hydroponic and Soil Nutrient |
| Nutrient Type | Inorganic Based |
| OMRI Certified | No |
| Nutrient Material Type | ["Powder"] |
What does Elite 91 Myco Jordan do for plants?
Elite 91 Myco Jordan is a wettable powder mycorrhizal inoculant that colonizes plant roots with endomycorrhizal fungi, forming thousands of absorbent access points that significantly enhance water and nutrient uptake. This symbiotic root colonization promotes stronger plant vigor, optimized root growth, improved crop quality, and increased yields.
Is Elite 91 Myco Jordan compatible with soil, coco, and hydroponics?
Yes, Elite 91 Myco Jordan is designed for use in soil, coco, and hydroponic systems. For hydroponics and irrigation, add 1/2 to 1 cup per 50 gallons of water, remove filters, and use nozzles with a minimum 18-mesh (1 mm) opening to prevent clogging.
How do you apply Elite 91 Myco Jordan at different growth stages?
Elite 91 Myco Jordan can be applied several ways depending on stage: lightly dust seeds before planting, soak starter media at 1 to 2 teaspoons per gallon for cuttings, dust 1 to 2 teaspoons directly onto roots at transplant, or drench established plants in soil and coco at 1 to 2 tablespoons per gallon up to three times per week. Continue applications until the second or third week of flower.
How often does Elite 91 Myco Jordan need to be applied to established plants?
For established plants in soil and coco, usually one treatment of Elite 91 Myco Jordan as a root drench at 1 to 2 tablespoons per gallon of water is enough to provide sufficient root inoculation for the entire crop life cycle. Growers may apply up to three times per week through the second or third week of flower if desired.
What is the Slurry Tech method for using Elite 91 Myco Jordan with cuttings?
The Slurry Tech method involves mixing 1/4 lb to 1.1 lbs of Elite 91 Myco Jordan with 300 ml to 1 liter of RO water to create a concentrated spore slurry. Cuttings in rockwool or starter cubes are then dipped or swiped a quarter inch to a half inch into the slurry and left in the tray for 48 to 72 hours. Any remaining slurry should be diluted with additional water and applied generously to the grow medium.
Can commercial fertilizers be used alongside Elite 91 Myco Jordan?
Some commercial fertilizers and mineral salts may be detrimental to the spores in Elite 91 Myco Jordan. When using a fertilizer at the time of planting, Elite 91 recommends applying the fertilizer at half the manufacturer's recommended rate for best results.
What is the shelf life of Elite 91 Myco Jordan and how should the 2 lb container be stored?
Elite 91 Myco Jordan has a guaranteed minimum shelf life of 2 years. The 2 lb container should be stored in a dry, cool place at temperatures between 45 and 85 degrees Fahrenheit, away from prolonged direct sunlight exposure.
