FloraPro Liquid is a "plug and play" program specifically tailored for large-scale production, delivering both simplicity, convenience and performance.
Commercial cultivation demands a balance between scale, expertise, and biological performance. FloraPro Liquid was engineered to deliver operational speed, efficiency, and nutritional delivery. By establishing a calcium-fortified base nutrient and leveraging precision nitrogen-tapering, this system provides the repeatable consistency required for facilities to perform at a high level.
More than a nutrient program; this is a technical framework designed to simplify the SOP while supporting the plant's full genetic potential. By optimizing the Ca:N ratio and providing an operational pathway for FUL+ to aid in resin production and terpene expression, FloraPro™ Liquid ensures that quality is never sacrificed for velocity.
Lo-Flo Panel Configuration w/ FUL+
LO-FLO rated for 0.05 – 14 GPM or 4.3 – 85 PSI. Configurations are recommendations and to be used as reference for dosing FloraPro
| Tag | Qty | Part Number | Description |
|---|---|---|---|
| A | 1 | HYKSTART-STD | Lo-Flo 3/4″ Standard Starter Kit |
| *B | 4 |
D14MZ3000VFBPHY D14MZ3000AFBPHY |
14 GPM Dosing Pump 1.25 – 11 mL |
| C | 5 | HYKMC34 | Lo-Flo 3/4″ Mixing Chamber Kit |
| D | 2 | D14MZ1000BPVFHY | 14 GPM Dosing Pump 3.75 – 37.5 mL |
| E | 1 | HYKMON | Lo-Flo 3/4″ Monitor Kit |
| F | 1 | WHA34-SS-KIT | Water Hammer Arrestor Kit |
*SEAL OPTIONS
Viton Seals (VF) For products with neutral to acidic pH. (pH Down, PK+, FUL+ & TrueFlo)
Aflas Seals (AF) For products with a higher than neutral to alkaline pH. (Silicates & pH Up)
Hi-Flo Panel Configuration w/ FUL+
HI-FLO rated for 2.2 – 40 GPM or 4.3 – 116 PSI. Configurations are recommendations and to be used as reference for dosing FloraPro
| Tag | Qty | Part Number | Description |
|---|---|---|---|
| A | 1 | HYKSTART150 | Hi-Flo 1 1/2″ Starter Kit |
| *B | 4 |
D40MZ3000BPVFHY D40MZ3000BPAFHY |
40 GPM Dosing Pump 1.25 – 7.5 mL |
| C | 5 | HYKMC150 | Hi-Flo 1 1/2″ Mixing Chamber Kit |
| D | 2 | D40MZ1000BPVFHY | 40 GPM Dosing Pump 3.75 – 37.5 mL |
| E | 1 | HYKMON150 | Hi-Flo 1 1/2″ Monitor Kit |
| F | 1 | WHA150-SS-KIT | Water Hammer Arrestor Kit |
*SEAL OPTIONS
Viton Seals (VF) For products with neutral to acidic pH. (pH Down, PK+, FUL+ & TrueFlo)
Aflas Seals (AF) For products with a higher than neutral to alkaline pH. (Silicates & pH Up)
General Hydroponics FloraPro Nutrients
General Hydroponics FloraPro Nutrients Here
When it comes to nutrients, more is not always better. Plant nutrition is all about balance. Minerals must be properly proportioned for plants to use them effectively. And not all plants require the same proportions.
FloraPro is specially formulated for high-value production crops where results and consistency are paramount. Our unique formulation and methodology produce superior results in large-scale operations. Designed from the ground up for fertilizer injection systems, FloraPro is easy to use and highly water-soluble. Our complete and balanced formula is cost-effective, scalable, and consistent to meet the high standards of a competitive industry.
FloraPro is a two-stage system, containing three products. During each growth phase — vegetative and flowering — you will use two of the three FloraPro products. During the vegetative stage, use FloraPro Grow and FloraPro Ca + Micros to build strong roots, stems, and leaves. Then, during the bloom cycle, use both FloraPro Bloom and FloraPro Ca + Micros to supply plants with the specific nutrients they require to grow large fruits and flowers. With these combinations, you can help deliver the precise nutrient ratios commercial plants like microgreens, and culinary and aromatherapeutic herbs crave.
