Picked up a used Twister T6 for $400 and replaced the gear box for $100 and now its like new again.
DIG Product Documents
DIG EXL Fogger Cut SheetDIG’s EXL Series Low-Flow 10-32 thread Foggers operate at a pressure range of 30 to 80 PSI to produce micro-sized droplets, supporting optimal cooling or humidifying conditions by reducing temperature and increasing humidity. The fogger’s vortex design spins incoming water into a ver...y fine mist, with higher incoming pressure giving smaller and finer droplets. Use where overhead cooling or misting is desired, or for plants that require constant moisture.
Key physiological processes such as photosynthesis are compromised when temperatures reach 95°F to 104°F. With the increasing severity and duration of heat waves, using EXL foggers to cool fruit trees and vines under these adverse conditions may result in lowering temperature by up to 20°F and improving resilience in future similar events.
Features
- Supports optimal cooling or humidifying conditions by reducing temperature and increasing humidity
- Incorporates a vortex design that swirls water droplets into a fine mist
- The EXL foggers can influence canopies and foliage temperatures by decreasing temperatures up to 20°F
- Operates in a normal pressure range of 35 to 80 PSI with high droplet uniformity
- Produces a droplet size of 50 to 100 microns (100 m at 50 PSI)
- Available in four color-coded Interchangeable nozzles
- Modular, lightweight and easy to maintain, configure and install
- Three-part construction with O-ring for a tight seal
- Manufactured from superior durable plastics with UV protection for extended life operation
Specifications
- Flow rate: .8 to 3 GPH (3 to 11.3 L/H)
- Operating pressure: 35 to 80 PSI (2.4 to 5.5 BAR)
- Inlet size: 1/4" (4 mm) barb or 10-32 thread
- Materials:
- Body and cover: Polyester
- Nozzels: Acetal
- O-ring: Buna-N
- Filter requirement: minimum of 200 mesh
Dimensions
- 1.3" W x 2.3" H (33 mm W x 58 mm H)
Maximum number of Fogger/Misters on 1/2" drip tubing with .600" ID
| Fogger/Mister spacing | 2' | 3' | 4' | 5' |
|---|---|---|---|---|
| Flow rate @ 30 PSI | 2.21 | 2.21 | 2.21 | 2.21 |
| Maximum length | 142' | 186' | 224' | 255' |
| Flow rate in GPM | 2.62 | 2.28 | 2.06 | 1.88 |
| Flow rate in GPH | 156.9 | 137 | 123.8 | 112.7 |
| # of fogger/misters | 71 | 62 | 56 | 51 |
| Head loss in PSI | 4.9 | 5.0 | 5.0 | 4.8 |
| Velocity (f/s) | 2.97 | 2.59 | 2.34 | 2.13 |
| Total head loss at the Fogger/Mister head | 4.9 | 5.0 | 5.0 | 4.8 |
| Brand | DIG |
|---|---|
| SKU | 07-047-PCK |
| Weight (lb.) | 0.7500 |
| Prop 65 | false |
| Lead Time | This Product Ships in 3-5 Business Days |
| Hazardous Material | false |
| UL Listed | No |
| ETL Listed | No |
| Case/Pack/Pallet Amount | 150 |
| Irrigation Part Type | Mister/Fogger |
What does DIG EXL Series Fogger Head do in a grow area?
DIG EXL Series Fogger Head creates a very fine mist for overhead cooling or humidifying, helping lower temperature and raise humidity. The vortex design spins incoming water into micro-sized droplets.
What pressure range does DIG EXL Series Fogger Head need?
DIG EXL Series Fogger Head operates in a 35 to 80 PSI range. Higher incoming pressure produces smaller, finer droplets.
What connections work with DIG EXL Series Fogger Head?
DIG EXL Series Fogger Head uses a 1/4-inch barb inlet or 10-32 thread inlet. DIG EXL Series Fogger Head suits low-flow misting setups using either connection style.
How can DIG EXL Series Fogger Head be sized for a 1/2-inch drip line?
On 1/2-inch drip tubing with 0.600-inch ID, DIG EXL Series Fogger Head supports up to 71 foggers at 2-foot spacing, 62 at 3-foot spacing, 56 at 4-foot spacing, or 51 at 5-foot spacing.
Which pack size is available for DIG EXL Series Fogger Head?
DIG EXL Series Fogger Head comes in a pack of 150.