very fast shipping
Great seller fast shipping. Fantastic product works great every time
AXEON Water Technologies Product Documents
S-200 Membrane Antiscalant SpecsheetAXEON® S-200 Membrane Antiscalant is a specially formulated antiscalant for reverse osmosis, nanofiltration, and ultrafiltration systems operating with feed water containing high levels of metal oxides, silica, and scale-forming minerals. S-200 inhibits the polymerization of reactive silica and disperses colloidal (non-reactive) silica, controlling the most challenging scaling conditions that cause RO membrane fouling and performance decline.
For growers running AXEON RO systems, regular S-200 dosing via an AXEON Chemical Injection System is the recommended approach for protecting membranes and reducing operating costs over the long term. S-200 is compatible with all major RO, NF, and UF membrane manufacturers and can be used diluted or undiluted. Effective across a wide pH range of 5.0 - 10.0.
Benefits
- Inhibits polymerization and precipitation of reactive silica
- Disperses colloidal (non-reactive) silica
- Controls inorganic scales over a wide concentration range
- Compatible with all major RO, NF, and UF membrane manufacturers
- May be used diluted or undiluted
- Effective in feed water with pH range 5.0 - 10.0
- Does not flocculate dissolved polymers, residual coagulants, or iron/aluminum-rich silica
- Reduces operating and capital costs by extending membrane life
Dosing
For systems with less than 100 GPM feed water, a typical dosage range is 1 - 10 mg/L (neat). The correct dosage will vary based on feedwater analysis and RO system recovery rate. Dose via an AXEON Chemical Injection System for accurate, consistent metering.
Compatible Systems
- AXEON® N-Series Reverse Osmosis Systems
- AXEON® R1-Series Reverse Osmosis Systems
- AXEON® Chemical Injection Systems - recommended for S-200 dosing
Questions about antiscalant dosing for your system? Call 888-815-9763 - our team can help you configure the right dosing rate for your feed water chemistry.
| Brand | AXEON Water Technologies |
|---|---|
| SKU | AXR1200 |
| Weight (lb.) | 52.0000 |
| Height (in.) | |
| Width (in.) | |
| Length (in.) | |
| Lead Time | This Product Ships in 3-5 Business Days |
| Shipping Restrictions | AK, HI |
| Prop 65 | false |
What does AXEON S-200 Membrane Antiscalant do for reverse osmosis, nanofiltration, and ultrafiltration systems?
AXEON S-200 Membrane Antiscalant inhibits reactive silica polymerization, disperses colloidal silica, and controls inorganic scale that can foul membranes and reduce performance.
Which membrane systems can use AXEON S-200 Membrane Antiscalant?
AXEON S-200 Membrane Antiscalant is compatible with all major reverse osmosis, nanofiltration, and ultrafiltration membrane manufacturers, including AXEON N-Series and R1-Series reverse osmosis systems.
What dosing range does AXEON S-200 Membrane Antiscalant use for systems below 100 GPM?
AXEON S-200 Membrane Antiscalant typically uses a dosage of 1 to 10 mg/L neat for systems with feed water below 100 GPM. The correct dosage depends on feedwater analysis and reverse osmosis system recovery rate.
Can AXEON S-200 Membrane Antiscalant be diluted, and what feed-water pH range supports use?
AXEON S-200 Membrane Antiscalant can be used diluted or undiluted and remains effective with feed water ranging from pH 5.0 to 10.0.
What equipment should dose AXEON S-200 Membrane Antiscalant?
AXEON S-200 Membrane Antiscalant should be dosed through an AXEON Chemical Injection System for accurate, consistent metering.