Bio Green Clean Grow Room Equipment Cleaner
Bio Green Clean is a biodegradable, plant-derived cleaning concentrate formulated for grow room equipment, reservoirs, trays, and hard surfaces. It cuts through nutrient salt buildup, mineral deposits, and organic residue on plastics, metals, and glass without leaving harmful residues that could interfere with plant health. The concentrated formula dilutes significantly for general cleaning and can be used at full strength for heavy-duty degreasing.
What Bio Green Clean Is Used For
Growers use Bio Green Clean between cycles to clean reservoirs, flood trays, net pots, irrigation lines, grow tent interiors, and hard-surface tools. The biodegradable formula is safe for plastic reservoirs and irrigation components that can be damaged by harsh chemical cleaners. A quick rinse after cleaning is sufficient before resuming production. For scale buildup in drip emitters or irrigation lines, a short soak in diluted solution breaks up mineral deposits without the corrosion risk of acid-based cleaners.
Biodegradable Formula
Bio Green Clean uses plant-derived surfactants that break down naturally after use, making disposal in standard wastewater systems straightforward. No hazardous waste handling required. For commercial operations running regular between-cycle cleaning protocols, this reduces both environmental footprint and compliance burden compared to solvent-based cleaners.
Browse all cleaning and sanitation supplies or explore pest control and garden care. Questions? Call 888-815-9763.
Bio Green Clean FAQ
Is Bio Green Clean safe for plastic reservoirs and irrigation components?
Yes. Bio Green Clean is formulated with plant-derived surfactants that are non-corrosive to plastics, PVC, and rubber irrigation components. It is safe for use on the same surfaces used in active growing systems, making it appropriate for cleaning reservoirs, flood trays, drip lines, and fittings between cycles. Rinse thoroughly with water after cleaning before resuming plant contact.
How do you dilute Bio Green Clean for general cleaning?
For general surface cleaning and residue removal, dilute at 1:10 to 1:20 (cleaner to water). For heavy nutrient salt and mineral buildup in reservoirs or trays, use a stronger dilution of 1:5 or apply undiluted to stubborn deposits and let soak for 5-10 minutes before scrubbing. Always rinse surfaces thoroughly with clean water after cleaning, especially any surface that will contact nutrient solution or plant roots in the next cycle.
Can Bio Green Clean be used to flush irrigation lines?
Yes. A diluted solution of Bio Green Clean can be run through drip irrigation systems and reservoir lines to break up mineral scale and organic residue between cycles. Use a 1:20 dilution, flush through the system, then follow with at least two clean water flushes to ensure no residue remains before reintroducing nutrient solution. For emitters with heavy blockage, remove and soak in solution for 15-30 minutes.
