Designed to flow 83 GPH EX1000 Deluxe achieves an astounding 1:1 ratio. The BP-6010 Booster Pump delivers the full flow rate with only 30 psi of feed water- No more low water pressure issues. The deluxe system includes our electric shutoff kit consisting of a float switch and feed water solenoid valve. The solenoid valve cuts feed water to the whole system when not in use.
This EX1000 Deluxe comes with 'Tall' pre-filter housings which allow for up to 34,000 total gallons of chlorine or chloramine removal-or 17,000 gallons of RO water at a 1:1 ratio. Chloramine removal requires the KDF85 Catalytic Carbon upgrade.
- Growonix EX1000-T-Deluxe Systems Features:
- High Flow Cold Water Membrane element
- Adjustable high pressure booster pump
- Eco Green Coconut Carbon filter (optional KDF85 Catalytic Carbon Filter)
- Washable Sediment Filter Input solenoid valve Tank float switch Ultraviolet Sterilizer
- No additional pre-filters needed!
Optional KDF85 Carbon Filter Upgrade
For chlorine and chloramines reduction for city water. Also for well water for iron, hydrogen sulfide, and heavy metals reduction. Will last TWO TIMES AS LONG as the standard green carbon filter. Prolongs the life of the membranes. Reduces chloramines, chlorine, iron, sulfur and heavy metals. Bacteriostatic qualities do not allow microbes to breed in filter.
Optional Accessories for EX400-T Systems:
GrowoniX Deluxe Series are available in two different packages- GX-Deluxe and EX-Deluxe. Both packages are built equally with the highest quality components and perform exactly the same. The GX Deluxe packages come with the full monty-a custom roller chassis and Splash Guard pump chassis. The EX Deluxe package leaves behind the fancy metal fabrication for a more economical price. Both EX and GX Deluxe Systems come with ultraviolet filters, tank float switches, input solenoid valves, and SCH80 input plumbing-everything you need start making tons of water. Never before has commercial grade water filtration been this affordable!
- Product Q&A
GrowoniX EX1000-T-Deluxe - 2000 GPD Deluxe Reverse Osmosis Filtration System with Tall Filters Questions & Answers
WATER TEMPERATURE FAQ's
How does water temperature effect flow rates through RO filters?
Between 77° and 50° water system production declines by 50%, as cold water is more dense, more viscous, and more difficult to move through the membranes.
What can be done to combat the effects of cold water on RO membranes?
Increasing the water pressure with a booster pump. Increasing the feed water temperature, which some people do by mixing warm and cold water from a diverter valve.
SYSTEM RATIOS FAQ's
Does the system ratio (waste ratio) change over time?
System ratios can change over time if the flow restrictor starts clogging due to hard feed water conditions.
Does the system ratio change with water temperature?
System ratios (waste ratios) can drift with cold feed water. Water travels the path of least resistance — the drain line! It’s important to check the system ratio during the winter months and adjust if necessary.
How can the system ratio be adjusted?
System ratios can be tuned with a ball valve or Flow Box. Never go lower than the system was intended for.
WATER PRESSURE FAQ's
How much water pressure is needed to run an RO system properly?
RO membranes require 40 psi of incoming pressure to produce even a drop of water except our GXM200-HF which requires only 20PSI. The only membrane on the planet that can do this.
What’s the maximum feed water pressure that an RO system should run on?
Incoming feed water pressure on all water filters, always and everywhere, should be no more than 80psi. Plastic filter housings cannot handle more pressure.
WELL WATER FAQ's
Can all GrowoniX water filters be used with well water?
Well water is generally too dirty for small RO membranes (100GPD through 400GPD systems). The large 4” membranes of the bigger systems (600GPD and larger) are recommended for well water treatment, unless the water demand is really low.
Are there any special filters needed to treat well water?
KDF85/ catalytic carbon filters are a must for well water treatment. This premium catalytic carbon filter with a bed of KDF85 media can reduce iron, hydrogen sulfide, heavy metals, and bacteria—all things that wreak havoc on RO components—especially membranes. Other consideration for special filters can only be deduced with a laboratory water analysis.
Does GrowoniX help with well water analysis?
They do. Just send Growonix your water analysis and they will look at it for free. If you don’t have a recent analysis, you can either use a local water lab, or purchase a test kit through GrowoniX send it off to our partner lab.
- Tech Specs