The Growonix EX1000 is designed to flow 42 gallons per hour of pure RO water with an astounding 1:1 ratio - High flow rates and water savings never before seen in a package so affordable and durable. Utilizing the best DOW membrane technology in the world (98.5% rejection), wrapped in our EX Series patented bracketing system, our premier flagship is a mobile powerhouse. A pair of liquid-filled stainless steel pressure gauges informs when it time to change the pre-filters. A manual flush valve allows you to clean the membrane, purging out pollutants that could otherwise add buildup to the system. Flushing adds considerable life to the membrane as well. For those who demand even more performance, the EX1000 can be used with a booster pump, raising the system pressure to 150psi, doubling the gallon per day output.
The EX Series is efficiency at it's best. We went back to the drawing board and asked the question, ""How can we do the same thing we did with the GX Series, but do it at a special price point, one which opens the doors to everyone wishing to make purified water - without sacrificing the quality that is synonymous with the GrowoniX product line?"" With the EX Series, we were able to strip out all the non-essential components, and leave in all the high quality parts found in the GX Series. We reduced the manufacturing cost and passed that savings along to our customers. Along the way, we discovered something special: On the EX600 and EX1000, the new bracket we developed allowed us to use tall 20" pre-filters - nobody has ever done this. The amount of sediment and carbon pre-treatment just doubled. The EX600 and EX1000 Series are offered at an unparalleled price point. Boasting the same processing power and upgrade-ability as the GX Series - and still at a 1:1 ratio. If your water demands grow in the near future, just add a BP Series booster pump and double your flow rate.
Growonix EX1000 Systems Features:
The EX1000 comes in 3 other variations for your specific requirements:
For chlorine and chloramines reduction for city water. Also for well water for iron, hydrogen sulfide, and heavy metals reduction. Will last TWO TIMES AS LONG as the standard green carbon filter. Prolongs the life of the membranes. Reduces chloramines, chlorine, iron, sulfur and heavy metals. Bacteriostatic qualities do not allow microbes to breed in filter.
*This filter is included. All other filters are available as substitutions and upgrades.
Green Coconut Carbon Block: NFS61 listed carbon filter manufactured with a patented process that greatly reduces greenhouse emissions—High flow with a low carbon footprint and superior chlorine removal.
White Coconut Carbon Block: Ultra high purity coconut shell activated carbon filter. Superior chemical absorption and turbidity reduction. The unbeatable cost of performance value.
KDF85/Catalytic Carbon Filter: KDF85 Bacteriostatic media controls the growth of microorganisms. Good for water-soluble metals removal, chlorine, chloramine, and scale. Highly reactive catalytic carbon, extremely porous and long-lasting. Absolutely the best carbon filter available, a must for well water treatment, and the best option for removal of CHLORAMINE! Needs flushing upon initial startup and after filter changes to remove carbon fines and dust.
Spun polypropylene: A true multi-staged depth filter utilizing separate layers of micron filtration. Constructed spun polypropylene, these filters offer superior dirt holding capacity at an extremely economical price. They have more pressure drop than pleated filters. Great filter for changing frequently, especially in well water applications, or any situation where feed water is loaded with sediment.
High flow pleated sediment filter: This is a washable, reusable, and durable sediment filter with a very low-pressure drop. Bacteria and chemical resistant. Great for high flow applications and extended time between filter changes.
High Flow Cold Water Membrane element: Less rejection than high rejection membranes, but with a much higher flow rate. Superior flow in cold water conditions as well. Our most popular membrane element.
High Rejection Membrane element: More rejection than high flow membranes, but with less flow rate. Great for ultra pure drinking water.
UV Water Filter
Stainless steel ultraviolet filtration to remove 99.9% of micro-organisms in your water supply. A must for well water treatment, whole house filter systems, or any time water will be stored. Flow rate of 1 GPM
WATER TEMPERATURE FAQ's
How does water temperature effect flow rates through RO filters?
Between 77° and 50° water system production declines by 50%, as cold water is more dense, more viscous, and more difficult to move through the membranes.
What can be done to combat the effects of cold water on RO membranes?
Increasing the water pressure with a booster pump. Increasing the feed water temperature, which some people do by mixing warm and cold water from a diverter valve.
SYSTEM RATIOS FAQ's
Does the system ratio (waste ratio) change over time?
System ratios can change over time if the flow restrictor starts clogging due to hard feed water conditions.
Does the system ratio change with water temperature?
System ratios (waste ratios) can drift with cold feed water. Water travels the path of least resistance — the drain line! It’s important to check the system ratio during the winter months and adjust if necessary.
How can the system ratio be adjusted?
System ratios can be tuned with a ball valve or Flow Box. Never go lower than the system was intended for.
WATER PRESSURE FAQ's
How much water pressure is needed to run an RO system properly?
RO membranes require 40 psi of incoming pressure to produce even a drop of water except our GXM200-HF which requires only 20PSI. The only membrane on the planet that can do this.
What’s the maximum feed water pressure that an RO system should run on?
Incoming feed water pressure on all water filters, always and everywhere, should be no more than 80psi. Plastic filter housings cannot handle more pressure.
WELL WATER FAQ's
Can all GrowoniX water filters be used with well water?
Well water is generally too dirty for small RO membranes (100GPD through 400GPD systems). The large 4” membranes of the bigger systems (600GPD and larger) are recommended for well water treatment, unless the water demand is really low.
Are there any special filters needed to treat well water?
KDF85/ catalytic carbon filters are a must for well water treatment. This premium catalytic carbon filter with a bed of KDF85 media can reduce iron, hydrogen sulfide, heavy metals, and bacteria—all things that wreak havoc on RO components—especially membranes. Other consideration for special filters can only be deduced with a laboratory water analysis.
Does GrowoniX help with well water analysis?
They do. Just send Growonix your water analysis and they will look at it for free. If you don’t have a recent analysis, you can either use a local water lab, or purchase a test kit through GrowoniX send it off to our partner lab.
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.