DIG Vinyl Distribution Tubing

Made of a high-quality vinyl material, it is UV resistant and can be used in a variety of applications

DIG’s 1/8" and 1/4" commercial-grade vinyl distribution tubing are available in black or brown color and in coil lengths of 100′ and 500′ 1000, and 3000’. Made of high-quality vinyl, the micro tubing is flexible and relatively soft. It is manufactured with an antioxidant and contains a minimum of 2% concentrated carbon black to protect the finished product from thermal degradation. The vinyl distribution tubing are used in a wide range of drip irrigation applications, including as feeder lines from the 1/2″ drip tubing to extend drip emitters or micro-sprinklers to the plants, as extensions from a single PC dripper to 4-, 6- and 12-outlet drip manifolds.

DIG's polyethylene drip tubing is available in a wide range of sizes and coil lengths.

Available in 100’ and 500′, 1000′ and 3000′ coils (30 m, 150 m, 300 m, 900 m)

Available Sizes (Inside & Outside Dimensions)

• 1/8 Inch ID (0.118" ID x .187" OD)
• 1/4 Inch OD
  • (0.156" ID x .245" OD)
  • (0.160" ID x .220" OD)
  • (0.170" ID x .250" OD)

Features & Benefits

• Contains a minimum of 2% concentrated Carbon Black and an antioxidant to protect the distribution tubing from thermal degradation
• Stiffness: 90 shore
• Softer, more flexible and easier to use than poly distribution tubing
• Meets the demand of micro irrigation systems for above- or below-ground layouts in agricultural and landscape installations
• Interchangeable with other manufacturers’ brands of the same OD size distribution tubing
• Available in black or brown colors
• Operating pressure: up to 30 PSI (2.1 BAR)