Please Note: **This is not a complete drip irrigation kit. This page will help you get started with the essential items that you need to start your own drip irrigation system. There are other items you may or may not require depeneding on the type of drip irrigation system you are building.**
Build You Own Netafim Drip Irrigation System
This Netafim Drip Irrigation System Creator will help you get started on building your desired drip system with all of the essential parts that comprise a drip irrigation system.
A Netafim drip irrigation system has both short and long term benefits over other emission devices such as conventional irrigation rotors/sprinklers. From water savings to healthier plants, drip irrigation provides solutions for efficient and effective irrigation even in the most challenging residential and commercial landscapes.
Zone/Table Setup:
1. Mainline Tubing - Bright White Polyethlyene Tubing
Polyethylene Tubing is UV and acid-resistant, made from the highest quality resins available. Together with Netafim's stringent quality controls- every reel of material undergoes a battery of tests and over 30 quality checks before leaving the factory - assuring the highest quality manufacturing standards, delivering the industry's best products. Polyethylene tubing is completely opaque to prevent algae growth and is white in color.
2. Fittings - 17mm TechLock Fittings
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (.56 Inch ID x .66 Inch OD)) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
3. Dripper Assemblies - Single Stake | Flat MOD | NetBow
Drip emitters are the core of drip irrigation systems. Drip emitters, also known as drippers, drip water directly to the plant root zone. Drippers slowly deliver water to the soil with less water lost to evaporation, excess heat, runoff, wind, and other environmental factors.
Drip emitters are the most popular water-saving irrigation technique. They are able to deliver a slow, constant supply of water that seeps deep into the root system. Although most drip emitters are installed in the tubing at ground level, some emitters like drip stakes are designed to attach to stakes and held above ground.
Netafim has several choices for drippers depending on the style of drip system you are looking to build.
Zone Control:
4. Filters - Disc Filter | Screen Filter
5. Pressure Regulator
Netafim Pressure Regulators are manufactured with non-corrosive, high quality plastic and brass, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. These will give instant response to variations in pressure assuring that outlet pressure will remain constant regardless of inlet pressure.
6. Control Valve
Netafim Series 80 Nylon Control Valves have the easiest operation and lowest maintenance costs. New and improved manual selector allows for hassle-free internal bleed without manipulating the position of the solenoid. Innovative labyrinth inlet eliminates the need for internal filters, reducing service costs for end users, contractors and Distributors.
Continue Shopping for Drip Irrigation Parts
If you arent seeing the drip irrigation parts that you require on this page, take a look through all of our drip irrigation categories to find the particular part or brand you are looking for to complete your drip irrigation system. If you can't find the specific parts you are looking for, please call in to speak to a dedicated sales rep who can help build out a system.
Distribution Tubing
Irrigation Fittings
Drip Emitters
Irrigation Filters
Pressure Regulators
Control Valves
Drip Irrigation systems can be set up in many different ways. Shop all of our drip irrigation categories and find the right parts you are looking for.
Drip Irrigation System Examples:
Sample Layout for Small to Medium Size Containers with 4-Way Multi-Outlet Dripper (MOD) Assemblies • 1 gallon or smaller containers, 1 stake per pot • 3 gallon containers, 2 stakes per container (as shown in sample layout) • 5 to 7 gallon containers, 4 stakes per container • 10 to 25 gallon containers, 4 to 6 stakes per container depending on container diameter
Pressure Compensating (PC) Spray Stakes • Uniform water and nutrient distribution over a broader surface area • For larger pots/containers over 25 gallons and/or with a wide diameter and grow bags • One spray stake for every 1.5 sq. ft. of container surface area • Extremely effective in larger pots with loose, soilless media
Brand | Netafim |
---|---|
SKU | NETA-DRIP-SYSTEM |
Weight (lb.) | 100 |
Prop 65 | No |
Lead Time | Products ship in 1-2 weeks |
UL Listed | No |
ETL Listed | No |
Irrigation Part Type | Drip System Kits |
Be the first to review this product
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.
20.24.0