Cutting Edge Solutions Sonoma Gold Bloom

Cutting Edge Solutions Sonoma Gold Bloom


Be the first to review this product

Cutting Edge Solutions Brand Product
$46.95 - $324.95

Lead time: Please select an option below


The Golden Standard For Bountiful, Beatuiful Blooms

Sonoma Gold Bloom 0-6-6 is a specially formulated all-purpose organic-based fertilizer for use in heavily amended soil gardens, as well as an organic-based additive for conventional fertilizer programs. Sonoma Gold is part of a 3 part family from Cutting Edge Solutions, made up by Sonoma Gold Grow , and Solar Gaia. The Sonoma Gold Family is user friendly and flows easily through irrigation systems. These are all 100% biodegradeable as well as hand crafted in small batches in Sonoma Count, CA.

Our Pacific Northwest sources of fish provide a local, renewable source of calcium, phosphorus and micronutrients. Specially formulated chelated micronutrients assist in crucial, on time fruit development and ripening.

For use during transition stage, through bloom.

Some sizes may not be stocked in all locations.

Guaranteed Analysis
  • Available Phosphoric Acid (P205) 6.0%
  • Soluble Potash 6.0%
  • Derived from:
    • Fish Meal, Potassium Sulfate, Magnesium Sulfate, Iron Sulfate, Calcium, and Phosphoric acid added as a stabilizing agent.
CES Sonoma Gold Badge
Directions For Use:
  • Shake well and measure carefully using a millilitre measuring cup.
  • Do not store product in direct sunlight.
  • Do not freeze.

  • Measurements For Drain to Waste & Soil Sonoma Gold Sonoma Bloom Solar Gaia
    Clones & Seedlings (After Roots) 2.5 ml/gal None 2.5 ml/gal
    Vegetative Stages (1-2 Weeks) 25-50 ml/gal None 2.5 ml/gal
    Early Flowering - Transition Stage (1-2 Weeks) 25-50 ml/gal 5 ml/gal 2.5 ml/gal
    Full Bloom - Fruting Stage (4-8 Weeks) 15 ml/gal 35 ml/gal 2.5 ml/gal
    Full Bloom - Flush Stage (5-10 Days) None None None
    Product Q&A

    Cutting Edge Solutions Sonoma Gold Bloom Questions & Answers

    Does your product work with all mediums?

    Yes. Cutting Edge Solutions products have been developed wth a very broad range of variables, from water sources to varying types of medium and growing methods. Through our experience with these differences we have achieved a final formula that is effective when used across a wide spectrum of methods.

    How long should I go between tank changes?

    Tank change intervals depend on the size of your reservoir, and whether or not you are using a drain to waste or recirculating watering system. The average life span of a reservoir is about 5-7 days. When using drain to waste it is best to check your PPM/EC level as the nutrient solution is used to make sure that there is no spike in the PPM/EC, but usually the plants will use the fertilizer as they grow. It is more critical to check your nutrient solution while utilizing a recirculating system, as the runoff can drastically change the PPM/EC level of your nutrient solution. If your PPM/EC is raising in your re-circulating reservoir, you should top it off with plain water until your meter shows an acceptable level.

    The size of a plant or the growth stage can determine the rate of water usage and nutrient uptake. Logically, the larger the plant gets, the more water and nutrient it will use. Some short-term crop plants (tomatoes, lettuce) go through an aggressive nutrient uptake around the 3-5 week period, so make sure to keep up on tank changes/monitoring during this critical time period.

    Is a transition period necessary between the vegetative and bloom stage?

    Depending on the type of plant you are growing, a transition mix may be beneficial. Some more hardy plants don’t need to gradually accept a new mix, while some more delicate plants appreciate more subtle changes in its' diet in order to reduce the risk of shock. Slower growing plant varieties may benefit from a transition period more than a faster growing variety as well. Some plants are naturally more efficient at taking up Iron and don’t require a transition stage.

    What is the optimal Ph level for my nutrient solution?

    The optimum Ph level for maximum nutrient availability is different for all elements, for instance Nitrogen has a different optimal Ph range than Phosphorus. The optimal Ph range can also vary due to medium and growing method variances, that is to say soil vs. rockwool or Aeroponics vs. Ebb and Flow. Therefore, we recommend a Ph range that is most inclusive, from 4.5 to 6.5. The Ph level we recommend for the most inclusive beneficial range is 6.

    We do not recommend using Ph up at any time. If your water is acidic, i.e. RO water, adjust your water to Ph 7.0, then add nutrients. Utilizing this method, the elements are less likely to be locked out because of a severe Ph swing.

    What PPM/EC is optimum for my nutrient solution?

    PPM levels vary from situation to situation. Our recommended vegetative mixing rate can run as high as 2000 PPM, while a “flush” mixing rate is much lower. Please refer to the CES product mixing and reference chart for specific recommended PPM ranges for our products. Note: Our mixing chart is based on a 0 PPM water source, please test your water to establish your specific base range.

    Tech Specs