Can Fan Max-Fan Inline Fans

Can Fan Max-Fan Inline Fans

SKU #: CAN-MAX-FAN

Be the first to review this product

Can Fan Brand Product
$164.95 - $1,419.95

Availability: In stock

Lead time: Please select an option below


Overview

Max-Fans are in line mixed-flow fans capable of jaw-dropping performance at high static pressure through innovative design.

The Max-Fan is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy-efficient. Compared with other inline fans, efficiency is 50%-100% higher. 6″-14″ come pre-wired with an 8 ft 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan® is a more powerful and efficient fan that takes less energy to run.

The Can Fan Max-Fans are available in a wide range of sizes

120 Volt

  • Can-Fan Max-Fan 6″ 334 CFM
  • Can-Fan Max-Fan 8″ 667 CFM
  • Can-Fan Max-Fan 8″ HO 932 CFM – 3 Speed
  • Can-Fan Max-Fan 10″ 1019 CFM
  • Can-Fan Max-Fan 12″ 1708 CFM
  • Can-Fan Max-Fan 14″ 1700 CFM

240 Volt Volt

  • Can-Fan Max-Fan 10″ 240V 1100 CFM
  • Can-Fan Max-Fan HO “The Beast” 14″ 240V 3343 CFM
  • Can-Fan Max-Fan 16″ 240V 2436 CFM
  • Can-Fan Max-Fan 18″ 240V 3665 CFM
  • Can-Fan Max-Fan 20″ 240V 4688 CFM

The 240 Volt Max-Fans can bring energy efficiency to larger systems. These high-powered Max-Fans™ potentially save hundreds of dollars each year in energy costs using a lightweight aluminum housing. Comes with a 6 ft power cord (240 V).

Detailed specifications & recommended Can Fan Filters for all Max Fans are near the bottom of this page.

All Can Fan Inline Fans are speed controllable. The 12" Max-Fan required the use of the variable transform controller. Only use a speed or motor control of the proper amperage to adjust the speed of the fans.

Details

  • Manufactured in Germany
  • Extremely energy efficient
  • Optimized mixed flow is quieter than comparable fans
  • Very high aerodynamic efficiency
  • Lower operational cost than traditional centrifugal fans
  • Easy installation
  • 5-year warranty
Max-Fan line of fans

Determining your requirement - Exhaust vs Recirculating (Scrubbing)

You will need to determine whether or not you are exhausting (going from a contaminated environment to a sterile environment in only a single pass through the filter) or recirculating, aka “scrubbing” (exhausting the system back into the contaminated space).

Exhaust

In an exhaust setting the air only passes through the filter one time so it is imperative that we remove as close to 100% of the contaminate as possible with that one chance. This requires that the contaminant have a certain time in contact with the carbon in order to be fully adsorbed. Our filters are marked with both exhaust and recirculating ratings for just this reason. If you are using this system to exhaust, DO NOT exceed the exhaust rating for the filter, the more this rating is exceeded the less contaminant will be adsorbed because the two will not have enough contact timefor adsorption to fully take place.

Exhaust Diagram

Recirculating

In a recirculating system, the contact time is not such a crucial number as we are taking contaminated air, filtering it, and releasing it back into what is typically and constantly decontaminated environment. It is for this reason that it is not necessary to remove 100% of the contaminant in a single pass. Instead we double the exhaust rating which will reduce the contact time, the goal here is to still remove a large portion of the contaminant but to get raise the cycle rate of air through the filter above the rate of emission from the source. Now, instead of removing 99.9% of the contaminant in a single pass we are getting closer to 60% but we are getting twice as many cycles through the filter in the same amount of time and over time, reducing the overall build-up of contaminant in the environment.

Recirculating diagram

Sizing Your Space

Once you’ve determined the type of system you need, it’s time to size your space.

Typically for exhaust we recommend a simple length x width x height /3 calculation. This will give you the amount of air (cubic feet per minute, CFM) that you will need to move to properly ventilate your space allowing for a three-minute air exchange (all the air in the space is exchanged for fresh air every three minutes). This is the number you will match your filter to.

Example:
Room size: 10’x12’x8’ (960 cubic feet)
960 cubic feet / 3 minutes = 320CFM (Minimum recommended CFM to exchange the air every 3 minutes)

For recirculating systems, you can use the same length x width x height but divide by 1.5. This will give you a high cycle rate while still ensuring the removal of a majority of contaminant with each pass through the filter.


Model Specifications

Can-Fan Max-Fan 8″ 667 CFM

CFM:667 at 0wg
RPM:3250
Max Watts:179
Amps:1.5 @ 120v AC 60 Hz
Diameter8"
Outside Diameter:30.5 cm / 12″
Length:8.875″
Blade Design:Mixed Flow
Housing:Plastic
Inlet/Outlet8″

Recommended Filters

Recirculating

  • Can-Lite 8×25
  • Can 66
  • Can 50
  • Can-Lite 8×40

Exhaust

  • Can 75
  • Can 100
  • Can 125

Can-Fan Max-Fan 8″ HO 932 CFM – 3 Speed

SpeedHighMediumLow
CFM:932 at 0wg849 at 0wg749 at 0wg
RPM:293527052460
Max Watts:213188178
Amps:1.87 @ 120v AC 60 Hz1.71 @ 120v AC 60Hz1.62 @ 120v AC 60Hz
Diameter8"
Outside Diameter:30.5 cm / 12″
Length:8.875″
Blade Design:Mixed Flow
Housing:Plastic
Inlet/Outlet8″

Recommended Filters

Recirculating

  • Can-Lite 8×25
  • Can 66
  • Can 50
  • Can-Lite 8×40
  • Can 75

Exhaust

  • Can 100
  • Can 125
  • Can 1505

Can-Fan Max-Fan 10″ 1019 CFM

CFM:1019 at 0wg
RPM:2990
Max Watts:228
Amps:1.9 @ 120v AC 60 Hz
Sones:11.5 at 0.10 wg
Diameter10"
Length:8.5″
Blade Design:Mixed Flow
Housing:Galvanized
Inlet/Outlet10″

Recommended Filters

Recirculating

  • Can 50
  • Can 75
  • Can-Lite 8×40

Exhaust

  • Can 100
  • Can 125
  • Can 150

Can-Fan Max-Fan 12″ 1708 CFM

CFM:1708 at 0wg
RPM:3374
Max Watts:489
Amps:4.1 @ 120v AC 60 Hz
Diameter12"
Length:12.125″
Blade Design:Mixed Flow
Housing:Galvanized
Inlet/Outlet12″

Recommended Filters

Recirculating

  • Can 75
  • Can 100
  • Can-Lite 12x40
  • Can 125
  • Can 150

Exhaust

  • Can-Lite 14×50 XL

Can-Fan Max-Fan 14″ 1700 CFM

CFM:1786 at 0wg
RPM:1700
Max Watts:253
Amps:2.1 @ 120v AC 60 Hz
Sones:10 at 0.10wg
Diameter14"
Length:15.75″
Blade Design:Mixed Flow
Housing:Galvanized
Inlet/Outlet14″

Recommended Filters

Exhaust

  • Can 150
  • Can-Lite 14×50 XL

Recirculating

  • Can 100
  • Can 125
  • Can-Lite 14x40

240 Volt models

Can-Fan Max-Fan 10″ 240 Volt

CFM:1100 at 0wg
RPM:2990
Max Watts:160
Amps:0.8 @ 234v AC 50 Hz
Max Ambeint Temp:50˚C / 122˚F
Diameter10"
Length:8.5"
Blade Design:Mixed Flow
Housing:Galvanized
Inlet/Outlet10″

Recommended Filters

Exhaust

  • Can 100
  • Can 125
  • Can 150

Exhaust

  • Can 50
  • Can 75
  • Can-Lite 14x40

Can-Fan Max-Fan HO “The Beast” 14″ 240 Volt 3343 CFM

CFM:3343 at 0wg
Max Watts:960
Amps:5.4 @ 240v AC 50 Hz
Diameter14"
Max Ambeint Temp:45˚C / 105˚F
Length:15.75″
Blade Design:Mixed Flow
Housing:Galvanized
Inlet/Outlet14″

Recommended Filters

Recirculating

  • Max 2500
  • Can 150
  • Can-Lite 14×50 XL

Can-Fan Max-Fan 16″ 240 Volt 2436 CFM

CFM:2436 at 0wg
RPM:1680
Max Watts:347
Amps:1.5 @ 240v AC 60 Hz
Max Ambeint Temp:80˚C / 176˚F
Diameter16"
Length:16.375″
Blade Design:Mixed Flow
Housing:Aluminum
Inlet/Outlet16″

Recommended Filters

Recirculating

  • Max 2500

Can-Fan Max-Fan 18″ 240V 3665 CFM

CFM:3665 at 0wg
RPM:1680
Max Watts:700
Amps:3.0 @ 240v AC 60 Hz
Max Ambeint Temp:80˚C / 176˚F
Diameter18"
Length:18.375″
Blade Design:Mixed Flow
Housing:Aluminum
Inlet/Outlet18″

Can-Fan Max-Fan 20″ 240V 4688 CFM

CFM:4688 at 0wg
RPM:1490
Max Watts:1073
Amps:4.5 @ 240v AC 60 Hz
Max Ambeint Temp:50˚C / 122˚F
Diameter20"
Length:20.375″
Blade Design:Mixed Flow
Housing:Aluminum
Inlet/Outlet20″
Product Q&A

Can Fan Max-Fan Inline Fans Questions & Answers

Q: Is my fan Speed Controllable?
A: Yes, all of our fans are speed controllable. Note: Fans running too slowly may overheat, causing the fan to turn off. The 12″ Max-Fan™ requires the use of our variable transformer control. Only use a speed or motor control of the proper amperage to adjust the speed of the fans. Never use a light dimmer.

Reviews
Tech Specs

Download Our App

Faster checkout, tracking notifications & more!