Titan Controls Product Documents
The CO2 Rain System showers your plants with CO2!
CO2 Rain System is a very effective and efficient way to enrich your growing environment with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled tubing through the eye screws, attach the plastic tubing from your CO2 Regulator and you've got CO2 raining down on your plants.
- The CO2 Rain System kit includes:
- 25 feet of 3/16" laser drilled tubing
- 3/16" plastic (T) fitting
- 6 eye screws
- Instructions for use
- Made in the USA!
- For best results, use with Titan Controls CO2 Regulator (Item # 702710)
- Tech Specs
Brand Titan Controls SKU HGC702711 Weight (lb.) 0.35 Lead Time Ships in 24-48 Hours Length (in.) 7.6 Width (in.) 6.8 Height (in.) 2.3 Prop 65 No UPC 847127002056 UL Listed No CO2 Enrichment CO2 Part & Accessories CO2 Part Type CO2 Rain Tubing
- Product Q&A
Titan Controls CO2 Rain System w/ 25 ft Tubing Questions & Answers
How do I space my CO2 Rain System eye screws on the ceiling?
Get a pen/pencil and a 4 foot piece of string. Make a loop in one end of the string and tack the loop to the center of your grow area. Now tie the pen/pencil on the other end of the string and make a circle on your ceiling. Take the eye screws and evenly space them around the circle you created on your ceiling. This will provide a consistent shower of CO2 when you activate your CO2 Regulator.
Will the CO2 Rain System work with other manufacturers CO2 regulators?
Yes, the CO2 Rain System works well with all of the current CO2 regulator systems on the market today.
My CO2 monitor/controller is reading really high all the time. What is wrong with it?
The main issue is the 2000 ppm of CO2 we exhale when we're breathing. If you're in your room and you see that the ppm is high, leave the area for an hour or so and turn off your CO2 source, then peek your head in and check the reading. It should be reading under 1000 ppm, depending on how well your room is sealed. After observing your CO2 Monitor/Controller for awhile, you'll start to see what your normal ppm level is in your room. The normal outdoor ppm is 400 ppm to 600 ppm based on where you live (city vs. rural).
Should I run my CO2 at night?
No, you should not. Plants photosynthesize CO2 only during the daylight hours. At night, the plants expire CO2 and have no use for CO2. Save yourself some money and only dose CO2 during daylight hours when it does the most good for the plants.
Why do gardeners enrich their growing space with CO2?
CO2 is proven to speed up a plants growth rate, improve overall health and increase a plants yield. There are also many other benefits to plants, among them greater resistance to temperature extremes and other forms of stress, better growth at low light intensities, improved root/top ratios and less injury from air pollutants.
What methods can I use to enrich CO2 in my indoor garden or greenhouse?
The two most common methods are using a CO2 generator/burner or bottled CO2. The most common generator/burner uses LP (liquid propane) gas from a tank or a NG (natural gas) conversion kit that allows you to hook up your generator/burner to the natural gas line in your house. The other option is to purchase bottled CO2 from a local supplier in your area and control its release into your garden area using a Titan Controls CO2 controller (Atlas 1) or short cycle repeat cycle timer with photocell. It should be noted that there is no advantage to increasing CO2 levels beyond 2000 PPM for most greenhouse plants. The optimum level of CO2 for plant growth is generally accepted at 1200 - 1600 PPM.