GrowoniX Product Documents
Designed to flow 8.5 gallons per hour of pure RO water, with an astounding 2:1 ratio for high flow rates and water savings never before seen in a package so affordable and durable. Utilizing the most efficient membrane technology in the world, built with dual o-ring fittings, and equipped with a steel pressure gauge.
For those who demand even more performance, the EX200 can be used with a booster pump, raising the system pressure to 80psi, increasing the gallon per day output.
- Growonix EX200 Systems Features:
- High Flow Cold Water membrane
- 2:1 system ratios - The most efficient in the industry
- Electrogalvanized powder coated steel brackets
- One Coconut Carbon filter rated for 8,000 gallons chlorine reduction
- High Flow pleated sediment filter, completely washable and reusable
- Auto Shutoff Valve-for positive automatic shutoff when using a float valve
- No additional pre-filters needed
Optional KDF85 Carbon Filter Upgrade
For chlorine and chloramines reduction for city water. Also for well water for iron, hydrogen sulfide, and heavy metals reduction. Will last TWO TIMES AS LONG as the standard green carbon filter. Prolongs the life of the membranes. Reduces chloramines, chlorine, iron, sulfur and heavy metals. Bacteriostatic qualities do not allow microbes to breed in filter.
Optional Accessories for EX200 Systems:
The EX Series is efficiency at its best. Growonix went back to the drawing board and asked the question, “How can we do the same thing we did with the GX Series, but do it at a special price point, one which opens the doors to everyone wishing to make purified water—without sacrificing the quality that is synonymous with the GrowoniX product line?” With the EX Series, was able to strip out all the non- essential components, and leave in all the high quality parts found in the GX Series. By doing that Growonix reduced the manufacturing cost and passed that savings along to their customers.
- Product Q&A
GrowoniX EX200 - 200 GPD Reverse Osmosis Filtration System Questions & Answers
WATER TEMPERATURE FAQ's
How does water temperature effect flow rates through RO filters?
Between 77° and 50° water system production declines by 50%, as cold water is more dense, more viscous, and more difficult to move through the membranes.
What can be done to combat the effects of cold water on RO membranes?
Increasing the water pressure with a booster pump. Increasing the feed water temperature, which some people do by mixing warm and cold water from a diverter valve.
SYSTEM RATIOS FAQ's
Does the system ratio (waste ratio) change over time?
System ratios can change over time if the flow restrictor starts clogging due to hard feed water conditions.
Does the system ratio change with water temperature?
System ratios (waste ratios) can drift with cold feed water. Water travels the path of least resistance — the drain line! It’s important to check the system ratio during the winter months and adjust if necessary.
How can the system ratio be adjusted?
System ratios can be tuned with a ball valve or Flow Box. Never go lower than the system was intended for.
WATER PRESSURE FAQ's
How much water pressure is needed to run an RO system properly?
RO membranes require 40 psi of incoming pressure to produce even a drop of water except our GXM200-HF which requires only 20PSI. The only membrane on the planet that can do this.
What’s the maximum feed water pressure that an RO system should run on?
Incoming feed water pressure on all water filters, always and everywhere, should be no more than 80psi. Plastic filter housings cannot handle more pressure.
WELL WATER FAQ's
Can all GrowoniX water filters be used with well water?
Well water is generally too dirty for small RO membranes (100GPD through 400GPD systems). The large 4” membranes of the bigger systems (600GPD and larger) are recommended for well water treatment, unless the water demand is really low.
Are there any special filters needed to treat well water?
KDF85/ catalytic carbon filters are a must for well water treatment. This premium catalytic carbon filter with a bed of KDF85 media can reduce iron, hydrogen sulfide, heavy metals, and bacteria—all things that wreak havoc on RO components—especially membranes. Other consideration for special filters can only be deduced with a laboratory water analysis.
Does GrowoniX help with well water analysis?
They do. Just send Growonix your water analysis and they will look at it for free. If you don’t have a recent analysis, you can either use a local water lab, or purchase a test kit through GrowoniX send it off to our partner lab.
- Tech Specs