A Full-Spectrum LED Grow Light Designed With Samsung LM301B Diodes
Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity.
Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Features & Benefits of the IOBOARD S33
Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages.
Future Ready Controls
Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments.
The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more.
Join the ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.
Optional Upgrade: Controller 69 PRO
Use this grow light with an advanced UIS controller like the AC Infinity CONTROLLER 69 PRO to fully automate it by integrating it into the UIS platform. This will enable further access to remote control over WiFi and advance programming like automation and grow recipes when connecting to the AC Infinity app.
Connect up to eight devices to provide each with shared or independent programming. Go beyond basic on/off triggering by setting dynamic programs that adjust fan speed and light intensity in response to changing temperature, humidity, and VPD. Set minimum baseline levels that your devices will constantly run at, only increasing when triggers are activated. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect with the AC Infinity app via Bluetooth or WiFi to remotely access your devices, unlock advanced programs, set alarms, and notifications, view historical charts, and export CSV data.
Specifications for the IONBOARD S33
|3 x 3 ft. Veg. | 3 x 3 ft. Flower
|2.30 @ 120V, 1.15 @ 240V, 0.97 @ 277V
|Power Connector Type
|US Plug (NEMA 1-15 Type-A)
|35 to 85% RH
|32 to 140°F
|18.50 x 18.50 in. x 0.5 in.
|This product ships in 1-2 business days
|LED Light Spectrum
|LED Fixture Type
|Manual Dimming Knob, Dimmable *with Controller
|Est. Electricity Cost /mo
|LED Diode Type
|LED Driver Type
|AC Infinity Proprietary Driver, Model GTS-100
|Total PPF Output
|2.30 A @ 120V | 1.15 A @ 240V | 0.97 A @ 277V
|Power Cord(s) Included
|Yes - 120 Volt (NEMA 1-15 Type-A)
|Power Cord Length
|Veg: 3' x 3'; Flower: 3' x 3'
|Grow Light Certifications
|IP65 Rated, ETL Listed
Be the first to review this product
Expert Advice Toll-Free
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.