General Hydroponics Product Documents
The WaterFarm 8-Pack is the system for big growers. The grower can arrange the WaterFarm units in a design that is suitable for any environment. Pack them tight or space them out for your growing situation!
The WaterFarm 8-pack is eight WaterFarm module units connected to one General Hydroponics Controller: an integrated 13 gallon reservoir and an 8 gallon controller unit. The Controller will keep each unit topped off with the correct level of nutrient for low maintenance. The kit is powered by GH's Dual Diaphragm Air Pump, and includes all the necessary hardware, supplies and General Hydroponics® Flora Series nutrients.
The grower can arrange the WaterFarm units in a design that is suitable for any environment. Pack them tight or space them out for your growing situation. The WaterFarm 8-Pack is the system for big growers.
This complete system includes:
- 8 WaterFarm Modules
- 8 Gallon Controller
- 2 Gallon Growth Mods
- 13 Gallon Reservoir
- Blue Tubing & Fittings
- Air Line & Fittings
- Dual Diaphragm Air Pump
- 3-Part Flora Kit
Clay pebbles not included.
Note: This system can be expanded to a maximum of 12 grow sites for one controller.
- Tech Specs
Plant Count 8 Growth Module Size 2 Gallon Number of Rows 2 Rows Brand General Hydroponics SKU HGC706980 Weight (lb.) 50 Width (in.) 24 Height (in.) 24 Length (in.) 24 Prop 65 No UPC 793094047203 Lead Time Ships in 7 Days
- Product Q&A
General Hydroponics WaterFarm 8 Site Hydroponics System Questions & Answers
What is a good inexpensive hydroponic system for the first time user?
General Hydroponic's WaterFarm, PowerGrower and EcoGrower are all good systems for a beginner. Nearly any plant can be grown, and if you later decide you would like to have some additional units, they can be linked together and expanded with our controller.
What is the best system for growing tomatoes, peppers and cucumbers?
These plants have longer growing periods and need enough space for adequate root development. The best GH systems for these crops are the WaterFarm, PowerGrower, EuroGrower and the EcoGrower.
Can I turn my system off at night to conserve energy? Should I run it continuously or cycle it at intervals?
All GH systems can be left off at night once the plant roots are long enough to reach the nutrient level in the reservoir. Longer cycles depend on the type of system you have:
AeroFlo systems: The cycle can be set to run continuously during the day and coming on once or twice during the night on 15 to 30 minute intervals.
EuroGrower systems: Set the timer to come on for .5 hour/ off 1.5 hour during the daylight cycle once the plant has a good root system. These systems use coco peat which holds moisture and nutrients in the root zone.
WaterFarm, PowerGrower and EcoGrower systems: Set the timer to come on for 1 hour/ off 1 hour during the daylight cycle.
RainForest systems: These units are run continuously, especially if you are trying to root cuttings. If you are growing plants, they can be shut off in the evening once the roots have grown into the nutrient solution.
All General Hydroponics systems can be run 24 hours a day 7 days a week for optimal results, power conservation is the only reason to cycle watering.
Can you recommend a simple solution for keeping growing media out of drains?
The General Hydroponics' CocoTek Mats were designed for this purpose. The CocoTek mats can be cut to fit any application and come in two sizes, 4' x 8' x 1/4" or 4' x 4' x 1".
The hoses on my WaterFarm have gotten dirty. What's the best way to unclog the system?
The easiest way to clean the drip ring and pumping column is to soak the pieces in hot water. You can add 1 Tablespoon bleach per Gallon as a cleanser. After soaking, plug one end of the drip ring and run hot water into the other end. This forces water out of the drip holes and removes any deposits. Some people keep an extra pumping column and drip ring that they swap out during every cleaning. The used pieces are soaked in bleach solution, rinsed thoroughly, dried, and stored for the next cleaning.
Why is my WaterFarm or PowerGrower not dripping from the drip ring?
Make sure the y connector for the 1/4" air line and 1/2" drip line (both are connected by the y connector and are the pumping column assembly) is on the bottom of the reservoir in the nutrient solution. There should be a 1/2" drip line to connect the drip ring tee to and a 1/4" air line to connect the 1/4" air line to coming out of the top of the pumping column support tube. If this part is correctly installed, check the drip ring, pumping column and y connector for debris and clogging. If the system still will not drip correctly please give us a call at 888-815-9763 so we can troubleshoot further.
How do I deal with algae build up in my hydroponic system?
The best method is prevention. If you keep the solution away from light, i.e. keep the lids closed and all openings sealed, you can prevent algae from growing.
If you already have algae in the system you can remove it with a brush, or use hydrogen peroxide (3ml of 3% H2O2 per gallon of solution) to remove it. If there are particles floating in the nutrient solution, be sure to flush the reservoir and growing chamber with ample water, and then start with a new batch of nutrient. If the problem is severe, make sure you have the algae completely flushed out to avoid the risk of clogging some of the flow lines in the system.
Are the plastic components used in General Hydroponics systems food grade safe?
Yes, all of General Hydroponic's plastic parts are food grade safe. No chemicals will leach into growing plants. The plastics are also UV stable under artificial lighting and natural lighting.