- Coverage Area
Veg: 3' x 2'; Flower: 3' x 2'
- Exact Watts
- LED Light Spectrum
- Total PPF Output
- PAR Efficiency
with Manual Dimming Knob, with Optional Controller
- LED Diode Type
Photobio Brand LED Diodes
- LED Driver Type
Photobio Brand Driver
- Power Cord(s) Included
Yes - 120 Volt
- Est. Electricity Cost /mo
The Multi Phase spectrum provides ideal red to blue ratio for vigorous growth and to maximize flower development.
The Phantom PHENO 440 horticultural lighting system combines high photon flux with superior efficiency. The low-profile design and wide voltage range is ideal for a wide range of applications.
Two adjustable light bars allow users to adjust light spread. Integrated output knob and PX port provide control over the number of photons to the plant canopy. This efficient and versatile system is compatible with PX series controllers (sold separately) to manage photoperiod and output.
Features of the Phantom PHENO LED
- 1100 μmol/s PPF @277V
- 2.5 μmol/joule PPE @277V
- 440W, 100-277V Driver
- High-efficiency Multi Phase spectrum
- Integrated flux control knob
- PX2 Lighting Controller Compatible
- Compact sized: 31.49"x 16.8" x 4.1"
- Net Weight: 19.4lbs/ 8.8kg
- Includes 10 ft. 120 Volt power cord
What comes included:
- Phantom PHENO 440 LED Lighting System
- 120V Power Cord
- Mounting cable and carabiner
- RJ11 Cable
- V Hangers (x2)
What separates the Phantom PHENO 440 from other LEDs on the market?
The two adjustable LED Panels on each side of the fixture allows for more directed photon intensity in the areas of your grow room that need it the most. Phantom's Primary 120° Optics, this angle helps to spread out the pinpoint intensity that plague most LEDs and some traditional lights.
The Driver for the PHENO provides every control and protection you can think of. Microprocessor control, open circuit protection, short circuit protection, overtemperature protection as well as intermal EMI suppressions and output compensation. There is also over/under voltage protection and indicator.
Its also compatible with one of the most popular grow light controllers out, the Autopilot PX2 Digital Lighting controller
The Phantom PHENO 440 horticultural lighting system combines high photon flux with superior efficiency. Suitable for both flowering and vegetative stages, the Multi-Phase spectrum provides ideal red to blue ratio for vigorous growth and to maximize flower development.
Photosynthetic Photon Intensity Distribution
LEDs are designed to emit light in a symmetrical 180° arc. That means the light energy is pushed out in virtually all directions at once. The optics of the Phantom PHENO LED focuses the light energy within the angle seen below. This means that more energy reaches the plants during the life the of the fixture. This angle helps to spread out the pin point intensity that plague most LEDs and some traditional lights.
Autopilot PX2 Digital Lighting controller & PHOTOBIO Quantum PAR Reader
Centralized control of Phantom fixtures. Provides dual zone photoperiod timing, photosynthetic photon flux scheduling, temperature based auto-dimming, high temp shutdown, sunrise/sunset simulation, with built in battery backup.
Two dedicated temperature sensors, one for each zone These sensors provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden.
The PX2 eliminates inrush current and replaces traditional lighting contactors, reducing infrastructure investment.
Tthe Advanced Quantum PAR Meter provides an accurate and cost-effective measurement for all light sources used to grow plants. The PHOTOBIO by Phantom Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a proportional relationship between the number of photons absorbed in 400-700nm band and the rate of photosynthesis, which is important for monitoring plant physiology.
The Advanced light meter comes complete with a remote sensor, two connection cables, the main unit, and easy to replace AAA batteries. The PAR meter can store up to 99 measurements for easy reference.
Specifications for the Phantom PHENO LED
- Voltage: 120/277 Volt
- Included Power cord: 10 ft. - 120 Volt
- Wattage: 440 Watts
- Frequency: 50/60 Hz
- Shipping Weight: 26.46 lbs.
- Package Dimensions: 31.49"x 16.8" x 4.1"
- Coverage Area
- Tech Specs
Brand Phantom SKU PHL440LMP Weight (lb.) 26.46 Prop 65 No Length (in.) 20.08 Width (in.) 37.4 Height (in.) 6.3 Warranty 5 Year Lead Time This product ships in 2-3 Business Days UPC 638104027502 Lighting Type LED LED Light Spectrum Full Spectrum LED Fixture Type Panel LED Features Manual Dimming Knob, Dimmable *with Controller Est. Electricity Cost /mo $19.01 Exact Watts 440 Watts Suggested Hanging Height > 6" Above Canopy LED Diode Type Photobio Brand LED Diodes LED Driver Type Photobio Brand Driver PAR Efficiency 2.5 μmol/J Total PPF Output 1100 μmol/s Voltage 100/277 Volts Amps 3.67 Amps @ 120 Volts, 2.12 Amps @ 208 Volts, 1.83 Amps @ 240 Volts, 1.59 Amps @ 277 Volts Frequency 50/60 Hz Power Cord(s) Included Yes - 120 Volt Power Cord Length 10 ft. Coverage Area Veg: 3' x 2'; Flower: 3' x 2' Grow Light Certifications IP65 Rated, UL Listed UL Listed Yes