- Home /
- Hydroponics /
- Water Filtration & Treatment /
- Water Filter Booster Pumps /
- GrowoniX GX600/1000 Recycler Booster Pump
DOUBLES pure water production for the GX/EX600-1000 water filters.
Recycling circuit reduces system ratio (as low as 1/4:1) .
Low water pressure and cold water are just a few of the factors that can adversely affect your water production and gardening efficiency. At GrowoniX, water delivery and pressure boosting are two of our favorite topics. We carry a complete line of custom-built pumps to meet every water demand. Low water pressure is no longer an issue. Our commercial/industrial grade pumps are ready for continuous duty and years of trouble-free of duty. With a GrowoniX pump, your water demand is guaranteed to be met.
GrowoniX Flow Box 1000 Recycler must be purchased to utilize this product. The GrowoniX Flow Box 1000 Recycler allows the drain water from the RO to be routed back through the membrane for another pass of filtering. Stainless needle valve for adjustment of Recycling volume and system ratio setting. Learn more Here!
Growonix BP-6010-REC Booster Pump Systems Features:
- Splash Guard chassis connects directly to the GX600/GX1000.
- The pump only needs 30psi of incoming water pressure to produce the full flow rate!
- Low pressure cutoff to safeguard the pump against a loss of incoming water pressure.
- Stainless steel liquid filled 300 psi system pressure gauge.
- Can be controlled manually or with our GrowoniX Electric Shutoff Kit (ESOK) .
- Higher pressure output than standard BP6010
Not sure what product you need for your system? Click the links below for GrowoniX system compatibility.
Click here to view the GrowoniX Replacement Filter Chart.
Click here to view the GrowoniX Product Guide.
BP-6010-REC Specs
| Port Size | 1/2" tube inlet x 3/8" tube outlet |
|---|---|
| Max Flow Rate GPM | 3.25 |
| High Pressure Cutoff | No |
| Max Output Pressure PSI | 150 |
| Standard Voltage | 110V 60Hz 1 PH |
| Voltage Amp Draw | 7.2A |
Features
| Brand | GrowoniX |
|---|---|
| SKU | BP-6010-REC |
| Weight (lb.) | 20 |
| Height (in.) | 20 |
| Width (in.) | 20 |
| Length (in.) | 20 |
| Lead Time | This product ships in 3 Business Days |
| Prop 65 | No |
GrowoniX GX600/1000 Recycler Booster Pump Questions & Answers
WATER TEMPERATURE FAQ's
How does water temperature effect flow rates through RO filters?
Between 77° and 50° water system production declines by 50%, as cold water is more dense, more viscous, and more difficult to move through the membranes.
What can be done to combat the effects of cold water on RO membranes?
Increasing the water pressure with a booster pump. Increasing the feed water temperature, which some people do by mixing warm and cold water from a diverter valve.
SYSTEM RATIOS FAQ's
Does the system ratio (waste ratio) change over time?
System ratios can change over time if the flow restrictor starts clogging due to hard feed water conditions.
Does the system ratio change with water temperature?
System ratios (waste ratios) can drift with cold feed water. Water travels the path of least resistance — the drain line! It’s important to check the system ratio during the winter months and adjust if necessary.
How can the system ratio be adjusted?
System ratios can be tuned with a ball valve or Flow Box. Never go lower than the system was intended for.
WATER PRESSURE FAQ's
How much water pressure is needed to run an RO system properly?
RO membranes require 40 psi of incoming pressure to produce even a drop of water except our GXM200-HF which requires only 20PSI. The only membrane on the planet that can do this.
What’s the maximum feed water pressure that an RO system should run on?
Incoming feed water pressure on all water filters, always and everywhere, should be no more than 80psi. Plastic filter housings cannot handle more pressure.
WELL WATER FAQ's
Can all GrowoniX water filters be used with well water?
Well water is generally too dirty for small RO membranes (100GPD through 400GPD systems). The large 4” membranes of the bigger systems (600GPD and larger) are recommended for well water treatment, unless the water demand is really low.
Are there any special filters needed to treat well water?
KDF85/ catalytic carbon filters are a must for well water treatment. This premium catalytic carbon filter with a bed of KDF85 media can reduce iron, hydrogen sulfide, heavy metals, and bacteria—all things that wreak havoc on RO components—especially membranes. Other consideration for special filters can only be deduced with a laboratory water analysis.
Does GrowoniX help with well water analysis?
They do. Just send Growonix your water analysis and they will look at it for free. If you don’t have a recent analysis, you can either use a local water lab, or purchase a test kit through GrowoniX send it off to our partner lab.
Be the first to review this product