The Dosatron D14 Series is perfect for the indoor grower. There are many different variations of the D14 to choose from and knowing the differences for your specific needs is critical!
14 GPM is the max flow rate for the D14 series
Available options: (Diltuion/Injection Range)
*Additional D14 injectors coming soon
Selecting your Dosatron Injector
Generally used for products with neutral to acidic pH. Ex: fertilizers, pesticides, acids (pH correction), supplements, surfactants
Generally used for products with a higher than neutral to alkaline pH. Ex: pH up products, calcium hydroxide (liquid lime), calcium carbonate, potassium carbonate
Used specifically for Peracetic acid (also known as peroxyacetic acid, or PAA) products. Ex: ZeroTol, SaniDate, etc.
Dilution / Injection Range
The Ratio Range for doser dilution is the range of rates that doser can be adjusted to for specific amount of chemical injection into the water supply. Most dosers can be adjusted within a range of dilution amounts and other dosers have fixed dilution amounts.
EX: Dilution range of 1:500 to 1:50 gives us a percentage of solution to water of 0.2% to 2%. This essentially tells us the percentage of chemical mixture dosed into the water supply.
The ratio and percentages are also commonly view in the following units.
D14 Ratio Ranges
|1:100 to 1:10
|37.5 to 375 mL
|7.5 to 75 tsp
|1.280 to 12.8 oz
|1:1000 to 1:100
|3.75 to 37.5 mL
|.76 to 7.6 tsp
|0.12 to 1.2 oz
|1:500 to 1:50
|7.5 to 75 mL
|1.5 to 15
|0.256 to 2.56 oz
|1:3000 to 1:333
|1.25 to 11 mL
|0.25 to 2.25 tsp
|0.0425 to 0.384 oz
There are several Dosatron Dosers with similar models numbers that vary by only 1 or 2 letters. BE SURE to make a selection based on your exact needs!
Units with HY in the name are specifically meant for the Dosatron NDS - Nutrient Delivery System. Units with "HY" in the model number include a SCH 80 Threaded Union to connect the injector to the other injectors/kits in-line.
Units with BY have a Bypasss option essentially taking the specific doser out of operation. Once the Bypass switch is flipped, the dosers stops the ram pump from pulling chemicals into the water line.
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector.
On the upstroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe.
On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.
*Doser in example may look different from your actually doser
|Water Flow Range
|0.05 to 14 GPM
|Operating Pressure Range
|4.3 to 85 PSI
|Available Housing Materials
Be the first to review this product
Expert Advice Toll-Free
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.