Grow environments require high-capacity, specially designed dehumidifiers to control humidity and protect crops. The Anden 130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop.
Control | Built-in Digital Control with Display |
---|---|
Control Mounting Option | Field-interchangeable from top to front |
Cabinet Insulation | 1/2" EPS |
Air Discharge Orientation | Top or End |
Inlet/Outlet Duct Collars | 10" Diameter |
Backdraft Damper at Outlet | Included |
Filter | MERV 11 Disposable |
Refrigerant | R410A |
Coil type | Corrosion-Resistant Aluminum |
Discharge Air Temperature Rise | 10°F-30°F |
Drain connection | 3/4" MNPT |
Warranty | 5 Years on all Parts Including Refrigeration System |
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Humidity and Growth
Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2 they need for efficient photosynthesis.
Vapor Pressure Deficit
For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe” by taking in moisture and letting it out.
The Anden Impact
Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind.
Cultivation rooms come in all shapes and sizes. This Anden Dehumidifier gives you flexible installation options to ensure maximum effectiveness and optimized conditions.
Suspended - Saves space in any cultivation room
Moveable (Model A130F Only) - Operates within the cultivation room
Inlet and Outlet Ducted (Model A130F Only) - For rooms with limited space
Accurate Readings, Easy Interface allow you to monitor and adjust the relative humidity of your indoor growth environment with the Anden A77 Digital Dehumidifier Control. This wall-mounted unit lets you dial in relative humidity levels to create a healthy, grow-optimized environment with constant monitoring and easy adjustments. This wall-mounted unit is hardwired to your Anden dehumidifier, giving you accurate readings and easy control without needing to directly access your dehumidifier. The relative humidity level is displayed in bold on the digital screen for easy readings and quick adjustments. Accurate monitoring and precise controls can save you money on energy costs by activating your humidification systems only when they’re needed. The control includes an on/off switch and up/down buttons.
Input voltage and current | Voltage: 35VDC (supplied by dehumidifier control board) |
---|---|
Control Range | 35%-80% RH |
Accuracy | +/- 5% RH |
Differential | 3% RH |
Low Limit | 40°F Dew Point |
High Limit | 99°F Dry Bulb |
Capacity | 130 ppd |
---|---|
Energy factor | 2.8 L/kWh - 5.9 pints/kWh |
Voltage, Phase, Frequency | 120VAC, 1Phase, 60 Hz |
Amps | 8.3A |
Watts | 920 |
Btu/h | 3,310 |
Noise | 50dBA |
---|---|
Dimensions (L x W x H) | 30 1/4" x 19 1/2" x 18 3/4" |
Weight | 113 lbs |
Inlet air operating conditions during: | |
Dehumidification | 50°F–104°F, 40°F dew point min |
Ventilation | 40°F–140°F, 0%–99% RH (non-condensing) |
Brand | Anden |
---|---|
SKU | A130 |
Weight (lb.) | 113 |
Length (in.) | 3 |
Width (in.) | 19.5 |
Height (in.) | 18.75 |
UPC | 686720187087 |
Shipping Restrictions | AK, HI |
Prop 65 | No |
UL Listed | No |
ETL Listed | No |
Exact Moisture Removal Capacity (Pints/Day) | 130 |
Dehumidifier Features | Adjustable Humidistat |
Dehumidifier Type | Overhead |
Drain Hose Length | 10 ft. |
ENERGY STAR Certified | Yes |
Lead Time | Ships in 2-3 Business days |
Air Filter | Yes |
Amps | 8.3 Amps |
Voltage | 120 Volts |
Be the first to review this product
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.
20.18.4