TurboKlone Klone Machines - 24 or 44 Sites


Be the first to review this product

TurboKlone Brand Product
$142.92 - $359.95

Lead time: Please select an option below


TurboKlone Product Documents

TurboKlone Product Specs

TurboKlone Cloners

TurboKlone offers the most effective and streamlined aeroponic cloning systems on the market. Through its patented design, TurboKlone cloning systems offer a wide array of planting site options while lowering the temperature of the growing environment and increasing the oxygen content of the water.


The 24 & 48 Site TurboKlone Cloning Machines are commercial-grade Cloning Systems with a patented, built-in cooling system. With 24 or 48 sites, it is everything the hobbyist or small home grower needs to propagate clones.

The TurboKlone Standard Series comes in the following options:

  • 24 Site without Humidity Dome
  • 24 Site with Humidity Dome
  • 48 Site without Humidity Dome
  • 48 Site with Humidity Dome

Even thught the 48 Site System has double the site as the 28 Site System, it is not double the size. Size is a serious concern with smaller growing operations. The 48 Site system allows you to use every nook and cranny of your grow room.

To propagate an even larger number of clones, check out the TurboKlone Elite Cloning Machines

Take a sterile blade and cut a 3-6" green branch off of the mother plant

Place the cutting into a clone collar and dip it in a cloning solution

Place the clone into your water filled cloner. Plug it in and check back in a few days.

Roots Appear in Days

Afte 6 days, roots will start to form on your cuttings. After 14 days, your clones with have strong, healthy, and long roots to help your transplanted cutting take to soil just like its original mother plants

TurboKlone Clones

Features & Benefits

Built-In Fan / Cooling System

TurboKlone is the only aeroponic cloning system with a built-in fan to help regulate the temperature of both the water and the air inside of the basin. Other cloning systems have an enclosed design that does not allow for sufficient ventilation. When you combine this design with the heat generated from the pump, you end up with hot, stagnant air and warm water that does not adequately break down oxygen.

TurboKlone’s built in cooling fan propagates your cuttings faster than any other cloner brand by pumping fresh, cool air into the reservoir and cooling chambers around the basin. As the air is pumped into the cloning unit, it mixes with the fine droplets being propelled from the spray jets and cools the water's temperature. With cooler water temperatures, oxygen is broken down more efficiently, increasing the amount of dissolved oxygen.

Built-In Fan

Lowers The Temperature

With TurboKlone’s patented design, a fan pushes air into the reservoir and the surrounding cooling chamber. The cool air from the fan mixes with the fine droplets of the water spraying up from the manifold. This lowers the temperature of the air and water, allowing oxygen to be broken down more efficiently. By maximizing the concentration of dissolved oxygen, Turboklone creates optimal conditions for roots to flourish.

Humidity Dome

Humidity is key to propagating healthy plants. If the cloning environment does not have the proper moisture content, you may experience dry clones, browning leaves or even burning; minimizing the chance of the clones survival. Trap in the moisture and watch your cuttings thrive with the TurboKlone Humidity Dome

TurboKlone Humidity Domes as well as all other parts, for either replacements or spares, can be found on the TurboKlone Brand Page here!

Have any more questions? Give one of our expert sales reps a call at 888-815-9763 and we will be more than happy to help!

Humidity Dome


Model24 Site - no Dome24 Site - with Dome48 Site - no Dome48 Site - with Dome
Package Dimensions (LxWxH)18" x 14" x 9"18" x 14" x 10"23" x 18" x 9"
Shipping Weight7 lbs.8 lbs.11 lbs.13 lbs.
Assembled Dimensions (LxWxH)18" x 14" x 11.5"18" x 14" x 17"23" x 18" x 11.5"23" x 18" x 17"
Reservoir Capacity2 Gallons3.75 Gallons
Unit Weight (Full)23.68 lbs.24.68 lbs.44.28 lbs.
Manifold Dimensions (LxWxH)5" x 4" x 3"15" x 11" x 3"
Pump250 GPH450 GPH
Fan3,600 RPM

TurboKlone Klone Machines - 24 or 44 Sites Videos

T24 Setup - without Humidity Dome

T48 Setup - without Humidity Dome

T24 Setup - with Humidity Dome

T48 Setup - with Humidity Dome

Product Q&A

TurboKlone Klone Machines - 24 or 44 Sites Questions & Answers

Q: How frequently does my cloning unit need to be cleaned?
A: We recommend that your TurboKlone Cloning System is cleaned in between each cloning cycle.

Q: How do I clean my TurboKlone unit?
A: While there are many options for cleaning, we recommend that you use a 30:1 ratio of water (H2O):hydrogen peroxide (H2O2) and run the cloner with the solution for a full day. The following day, empty your unit and run it with pure water (H2O) for a minimum of eight hours.

Q: What temperature should my reservoir be?
A: We recommend keeping your TurboKlone’s reservoir temperatures between 65℉ and 75℉, with your ideal temperature being 70℉. Unlike other cloning units, TurboKlone’s cloning units help keep your temperatures down with our patented, self-cooling design

Q: What kind of water should I use?
A: At TurboKlone, we generally recommend plain tap or well water. However, if you only have access to RO water, we suggest adding in some spring water to increase the amount of particulates. Water free of particulates provides less nutrients to the plant and makes the water more difficult to pH.

Q: What should the pH of my water be?
A: The ideal pH for efficient propagation is between 5.8 and 6.2.

Q: What kind of light works best with my TurboKlone System?
A: Simple T12 fluorescent 40 watt lights work great. A two foot dual bulb fixture works well over the 16 and 32 site systems while a four foot dual bulb fixture works well for the 64 and 128 site system.

Q: How far should my light be from my cuttings?
A: 8-24 inches is more than sufficient.

Q: What light schedule should my clones be on?
A: It’s usually the growers preference, but 18 – 24 hours a day works great.

Q: How large should my cutting be?
A: As a general rule, you want your cutting to be somewhere between 6” and 8” in length. It is important to remember that the larger the cutting, the more energy it requires to sustain itself. Be sure to keep about 2” exposed on the inside of the unit.

Q: How long until I start seeing roots?
A: Root development can be influenced by a number of different factors, including your cloning environment, the type of plant you are cloning, and the condition of the mother plant you’ve selected. That said, most cuttings will begin to form root nodules between 5 to 8 days and will be ready to transplant between 12 and 16.

Q: When are my cuttings ready to be transplanted?
A: Depending on the medium your transplanting into, your cuttings should have roots that are at least 2” long. Typically, longer, more developed roots have a higher success rate. Remember if roots get too long they can be trimmed with sterile scissors during transplanting.

Q: Where’s the best place to set up and run my TurboKlone Unit?
A: Stability is key. We recommend finding a flat, sturdy surface that is easily accessible and capable of supporting your fully-loaded unit. Work tables, commercial racking, or floor-mounted shelving are all great options.

Q: Can I reuse my Clone Collars?
A: Yes. Our collars can be cleaned by soaking them in the same solution of water and hydrogen peroxide (30:1 ratio). While cleaning your collars is an option, may growers choose to replace them each cycle to avoid contamination from left over plant material and bacteria.

Q: Do I need the humidity dome?
A: Humidity domes can be very effective, but are not always necessarily. Humidity domes are available for users who are cloning in an environment with less than 40% humidity. When using a humidity dome, it is very important to remove the dome daily and allow any excessive moisture build-up to evaporate. This decreases the risk.

Q: Does my pump need to run continuously 24 hours a day?
A: The short answer is yes. TurboKlone’s pumps are magnetic drive pumps and are designed to be run continuously. In fact, repeated powering on and off of your pump can lead to pump failure. While some people do prefer to power cycle their units, doing so will void your pump warranty. Power cycle at your own risk.

Q: Do my TurboKlone products come with a warranty?
A: Yes. TurboKlone products are all under warranty for the first 90 days following your purchase.

Tech Specs