888-815-9763 Contact Us

888-815-9763
Email Us
Connect with us! We know grow.
Phone Sales & Support
Mon - Fri, 8am - 4pm PST.

Learning Center

Home /
Harvest /
Trimming Machines /
Commercial & Large Scale Trimming Machines /
Twister Triple T2S Trimming System with Leaf Collector Vacuums

Twister Product Documents

Twister T2 Brochure

Twister T2 Product Spec Sheet

Twister T2 Product Cut Sheet

Twister T2 Product Instructions

Twister T2 Cleaning Instructions

Twister T2 Wet Trimming Trips

Twister T2 Dry Trimming Tips

The All New Twister T2S Trimming Machine

The Twister T2S Trimming Machine is here just in time for harvest! With all the power and efficiency of the original T2, this updated version also includes:

Full Stainless Steel Guarding for both Tumbler & Blades

Includes 2 New Tumbler Guards & Upgraded Control Box

Guards cover all Pinch Points, preventing access to the sides of the tumbler & rollers on the end plates

Stainless Tumbler Guards clean with less effort & have 92% more open area than plastic guard

Control Box is fitted with an emergency stop & tumbler guard includes an interlock to shut the machine down if lifted

What's The Difference Between The Standard And Narrow Tumblers?

In the past, Twister labeled their tumblers as "wet" and "dry". After three years of product testing and feedback, Twister has discovered the Wet (1/4") Tumbler works best on 'quality' wet and dry flower.

11% moisture is the ideal moisture level for dry trimming with Twister.

Because of this, we are now selling all trimmers with a 'Standard Tumbler' (1/4" slot). The 3/16" tumbler will now be referred to as the 'Narrow Tumbler' and is available as an add-on. The narrow tumbler is suggested when trimming very fragile flower.

Trim Up To 124 lbs An Hour wet With The Twister T2 Ultimate Trimming System with Leaf Collectors

If you have a large scale commercial grow, the harvest process means its finally time to reap the benefits of your hard work and investment throughout the growing cycle. However, trimming by hand can take weeks, and takes financial investment for a trimming crew.

What's included?

Twister T2S Trimming Machine (x3)

T2 Leaf Collector Vacuum (x3)

T2 Tumbler Choice (standard or standard and narrow)

T2 Hopper

T2 Leaf Collector Top Filter Bag "High Flow" (40 Micron)

10 Year Standard Warranty

Why Twister Made The Switch to Corrosion-Resistant Nitrided Blades

Recently, Twister began implementing corrosion-resistant nitrided blades in their trimming machines. While these are more expensive, there are a number of reasons why this was for the better:

Hardened Steel
Increased tensile strength
Materials are approved for contact with food products

Increased resistance to corrosion
Increased wear resistance
600 hour lifespan depending on environment & operator

Less buildup on the blades
Blades stay sharp longer

The Twister T2 Provides Industry Best Performance

The Twister T2 was designed to exceed the expectations of a medium to large scale commercial grows. This trimming machine provides maximum performance and seeks to meet industry best performance, with no downtime. It is a serious investment, but a positive ROI can usually be achieved in less than one harvest when considering the cost of a trimming crew!

It also features an incredibly powerful motor, capable of consistently delivering the maximum output to meet the demanding production requirements of your trimming sessions.

The T2 tumblers are manufactured with 304 stainless steel. They have a diameter of 6 inches, which minimizes wall crawl and results in the gentle, efficient flow of your flower through the tumbler. Twister never uses Teflon-based PFE-PFTE coatings.

The Twister T2 features a powerful motor to deliver maximum output consistently, and the tumblers are made of 304 stainless steel

When it comes to commercial grows, quality matters

The Twister T2 will meet the demands of just about any commercial facility, processing up to 124 pounds wet. This trimming machine is very lightweight and features a completely watertight, stainless steel design. It can deliver heavy-weight results for any sized commercial grow.

Instead of spending days or weeks trimming your plants by hand, use the T2 and cut your trimming time down to a matter of hours!

Legnedary Build Quality

When you purchase a Twister, you are investing in over ten years of manufacturing experience. Quality is in our DNA. We strive each and every day to build the best equipment on the planet. How do measure this type of quality? Customer Success. T2's have trimmed over 10 million pounds of flower in the last 10 years?

Preserve the Profile of your Flower

Why grind down the appearance of your flower (with other dry trimmers) when you can keep the natural beauty and quality profile of your flower intact with Twister’s SoftTumble(tm) technology. How is this possible? Keep the magic number at 11.

Easy Tear Down and Cleaning

Disassembles in seconds, giving you easy access to the componnents when needed. No tools required.

Trusted by the Best

A large percentage of the world’s flower is trimmed on the Twister T2. Most of our largest producers run T2’s each and every day for up to 12-14 hours a day. The question becomes, if the largest facilities on the planet trust the Twister T2, maybe you should too?

Scale and bring costs down

The Twister T2 is designed for large scale production lines that care about consistency and quality control. Most T2 customers started with one machine and have grown and scaled out to multiple production lines running 12-18 T2’s at a time. Why does this matter? When you choose a T2, you choose a future that you can scale on.

100% Watertight

Did we mention it’s watertight? In fact, it’s the only trimmer on the planet that is, keeping your machine safe from any water or moisture damage. Consider this built-in investment protection. Another reason to choose Twister T2.

Preserve your trim for extracts with the Twister T2 Trim Saver

The Twister T2 With Trim Saver takes your harvest to the next level, capable of producing extract ready trim.

Whereas most trimming machines mangle your trim and render it useless, the T2 saves it so you can produce top-shelf concentrates.

It uses radial cyclone technology, which creates airflow from a vacuum, effectively bypassing the impeller to preserve your trim so you can make top-shelf concentrates!

The Trim Saver is truly plug-and-play: simply connect the vacuum hose to the trimmer and hit the power switch, it is that simple.

Whether you are trimming wet or dry, you will get maximum separation efficiency of your trim, collecting over 99% of your product in an easy-to-empty collection bin beneath the cyclone.

On top of this, it is very easy to clean, taking less than 2 minutes!

This version of the T2 Ultimate Trimming System includes just the leaf collector, but if you'd like, you can learn more about the Twister T2 Ultimate Trimming System With Trim Saver here!

The Twister T2 Trim Saver preserves your trim for extracts.

The Twister Trimmer leaf collector saves your trim for use with extracts.

You asked for it, we listened. The best trimmers on the planet can now trim dry using our new DRY Soft Tumble technology.

Trim Wet or Dry

Trim a broad range of moisture content, 11% to fully hydrated flower.

No Stopping

The T2 is designed for continues flower trimming, with no stoppages throughout the workday.

Lowest Handling

Why tumble your delicate flowers for 20 minutes, when 30 seconds will do?

Compare the Twister T2 to other trimming machines

Compare the Twister T4 to other trimming machines and trimming by hand.

Upgrade Your Twister T2 Trimming Machine

Your Twister T2 Trimming Machine can be upgraded even further with add ons such as conveyors and rails, a bucker, replacement parts and accessories, and drying rack systems.

Conveyors and Rails

Conveyors can increase your speed and consistency by up to 20%. They are FDA approved, and make it easy to ensure your T2 is always being fed the right amount of flowers, throughout the entire day. They are adjustable in height, and can be used with both the T4 and the T2. We carry both quality control conveyors and feed conveyors , both which are very important.

Buckers

Adding a bucker to your trimming operation will take your efficiency and profit through the roof. A lot of emphasis gets put on the trimming process, but removing the stems and branches from your buds first is essential. You understand how important automating trimming is, but automating your de-stemming process is equally important.

Replacement parts and accessories

You may want to grab some T2 replacement parts and accessories , such as extra tumblers for trimming different strains and preventing cross contamination. Or, maybe you need some leaf collector bags or filters. We also carry replacement belts and machine cleaner to keep everything running smooth.

Twister Drying Rack Systems

What do you do with your buds after you trim them? If you are trimming wet, the next step is to dry them. Twister drying racks are stackable, and make drying your flower easy and saves space.

Twister Freezing & Handling Trays

The new Twister Stackable Freezing / Handling Trays are perfect for handling and freezing product. Designed to stack on top of each other for maximum airflow, you can easily stack 50 of these ventilated trays per palette for easy storage and movement to and from rooms or locations. High-density food-grade polyethylene is 100% freezer and dishwasher safe. Maximum durability. Trim straight into these bad boys!!

Twister T2 Machine Specifications

Input Voltage -120V
Current Draw - 14.8A
Blade Motor -1HP, Fan Cooled, Stainless
Tumbler Motor - 1/30HP, Epoxy Coated, Watertight
Cut Height - 0.040" / 1/25 / 1mm
Weight - 215lbs/97.5kg
Shipping Weight (complete w/leaf collector) - 420lbs/190kg
Length - 42.5in/107.9cm
Width - 27.5in/69.9cm
Height - 32.5in/82cm
Discharge - 6in/152mm
Trimming Capability (2 machines) - 27-29lbs/hour dry, 75-85lbs/hour wet

Leaf Collector Specs

Input Voltage - 208 / 230V
Motor - 2HP, UL & CSA Approved, Fan Cooled
Amps (running) - 9A
Amps (startup) - 45A
Motor Speed - 3450RPM
Airflow Capacity - 1700CFM
Static Pressure -10.5in of H20
Impeller - 12"/305mm
Inlet - 6"/153mm
Height - 36in / 91.5cm
Weight - 123lbs/56kg
Circuit Breaker Required - 15A / 240V
Connector (plug) - 15A 250V (NEMA 6-15)
Sound Rating - 80 db
Fused - Yes
Maintenance Clean impeller housing frequently. Clean filter bag.