The Twister T2S Trimming Machine is here just in time for harvest! With all the power and efficiency of the original T2, this updated version also includes:
In the past, Twister labeled their tumblers as "wet" and "dry". After three years of product testing and feedback, Twister has discovered the Wet (1/4") Tumbler works best on 'quality' wet and dry flower.
11% moisture is the ideal moisture level for dry trimming with Twister.
Because of this, we are now selling all trimmers with a 'Standard Tumbler' (1/4" slot). The 3/16" tumbler will now be referred to as the 'Narrow Tumbler' and is available as an add-on. The narrow tumbler is suggested when trimming very fragile flower.
If you have a large scale commercial grow, the harvest process means its finally time to reap the benefits of your hard work and investment throughout the growing cycle. However, trimming by hand can take weeks, and takes financial investment for a trimming crew.
Or, you could trim up to 19 pounds an hour with the Twister T2S Trimming Machine with Trim Saver! This trimming machine is perfect for commercial growers looking to increase efficiency and automation of their harvest.
Recently, Twister began implementing corrosion-resistant nitrided blades in their trimming machines. While these are more expensive, there are a number of reasons why this was for the better:
The Twister T2S was designed to exceed the expectations of a medium to large scale commercial grows. This trimming machine provides maximum performance and seeks to meet industry best performance, with no downtime.,p> It is a serious investment, but a positive ROI can usually be achieved in less than one harvest when considering the cost of a trimming crew!
It also features an incredibly powerful motor, capable of consistently delivering the maximum output to meet the demanding production requirements of your trimming sessions.
The T2S tumblers are manufactured with 304 stainless steel. They have a diameter of 6 inches, which minimizes wall crawl and results in the gentle, efficient flow of your flower through the tumbler. Twister never uses Teflon-based PFE-PFTE coatings.
The Twister T2S will meet the demands of just about any commercial facility, processing 15-19 pounds an hour dry, and up to 88 pounds wet. This trimming machine is very lightweight and features a completely watertight, stainless steel design. It can deliver heavy-weight results for any sized commercial grow.
Instead of spending days or weeks trimming your plants by hand, use the T2S and cut your trimming time down to a matter of hours!
When you purchase a Twister, you are investing in over ten years of manufacturing experience. Quality is in our DNA. We strive each and every day to build the best equipment on the planet. How do measure this type of quality? Customer Success. T2S's have trimmed over 10 million pounds of flower in the last 10 years?
Why grind down the appearance of your flower (with other dry trimmers) when you can keep the natural beauty and quality profile of your flower intact with Twister’s SoftTumble (TM) technology. How is this possible? Keep the magic number at 11.
Disassembles in seconds, giving you easy access to the componnents when needed. No tools required.
A large percentage of the world’s flowers is trimmed on the Twister T2S. Most of our largest producers run T2S’s each and every day for up to 12-14 hours a day. The question becomes, if the largest facilities on the planet trust the Twister T2S, maybe you should too?
The Twister T2S is designed for large scale production lines that care about consistency and quality control. Most T2S customers started with one machine and have grown and scaled out to multiple production lines running 12-18 T2S’s at a time. Why does this matter? When you choose a T2S, you choose a future that you can scale on.
Did we mention it’s watertight? In fact, it’s the only trimmer on the planet that is, keeping your machine safe from any water or moisture damage. Consider this built-in investment protection. Another reason to choose Twister T2S.
The Twister T2S With Trim Saver takes your harvest to the next level, capable of producing extract ready trim.
Whereas most trimming machines mangle your trim and render it useless, the T2S saves it so you can produce top-shelf concentrates.
It uses radial cyclone technology, which creates airflow from a vacuum, effectively bypassing the impeller to preserve your trim so you can make top-shelf concentrates!
The Trim Saver is truly plug-and-play: simply connect the vacuum hose to the trimmer and hit the power switch, it is that simple.
Whether you are trimming wet or dry, you will get maximum separation efficiency of your trim, collecting over 99% of your product in an easy-to-empty collection bin beneath the cyclone.
On top of this, it is very easy to clean, taking less than 2 minutes!
This version of the T2S includes the standard leaf collector vacuum, but if you need to save your trim for extracts, you will be better off with the Twister T2S With Trim Saver!
You asked for it, we listened. The best trimmers on the planet can now trim dry using our new DRY Soft Tumble technology.
Trim a broad range of moisture content, 11% to fully hydrated flower.
The T2S is designed for continues flower trimming, with no stoppages throughout the workday.
Why tumble your delicate flowers for 20 minutes, when 30 seconds will do?
Your Twister T2S Trimming Machine can be upgraded even further with add ons such as conveyors and rails, a bucker, replacement parts and accessories, and drying rack systems.
Conveyors can increase your speed and consistency by up to 20%. They are FDA approved, and make it easy to ensure your T2S is always being fed the right amount of flowers, throughout the entire day. They are adjustable in height, and can be used with both the T4 and the T2S. We carry both quality control conveyors and feed conveyors , both which are very important.
Adding a bucker to your trimming operation will take your efficiency and profit through the roof. A lot of emphasis gets put on the trimming process, but removing the stems and branches from your buds first is essential. You understand how important automating trimming is, but automating your de-stemming process is equally important.
You may want to grab some T2S replacement parts and accessories , such as extra tumblers for trimming different strains and preventing cross contamination. Or, maybe you need some leaf collector bags or filters. We also carry replacement belts and machine cleaner to keep everything running smooth.
What do you do with your buds after you trim them? If you are trimming wet, the next step is to dry them. Twister drying racks are stackable, and make drying your flower easy and saves space.
The new Twister Stackable Freezing / Handling Trays are perfect for handling and freezing product. Designed to stack on top of each other for maximum airflow, you can easily stack 50 of these ventilated trays per palette for easy storage and movement to and from rooms or locations. High density food-grade polyethylene is 100% freezer and dishwasher safe. Maximum durability. Trim straight into these bad boys!!
What is the ideal moisture % for trimming?
Trim at a moisture level between 10-13%. For best results, we recommend trimming at 11% Moisture.
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.