- Home /
- Harvest /
- Trimming Machines /
- Wet Trimming Machines /
- Mobius M108S Trimming Machine
- Trimmer Type
Tumbler - Production Capability
44 lbs/hr Dry; 120 lbs/hr Wet - Operation
Motorized - Feed Type
Continuous Feed - Plant Material
Wet & Dry - Voltage
3 PHASE, 208V
The M108S Trimming Machine with a revolutionary design
The Mobius M108S is loaded with innovative and patented technology taking the industry by storm.
Built for cultivators who demand high-quality trimmed flower without sacrificing production volume or speed, the M108S is revolutionizing trim rooms around the world. Our AirThread Tension Tumbler offers 50% more blade access than rival trimmers allowing product to move through the machine faster with less surface contact. Three TriFlex blades offer 108” of cut length using blades flexed against each other to offer a precision cut identical to scissors. The machine breaks-down by hand with no tools other than our handy Spring Jack. An integrated trim separator with smooth internal surfaces and no hoses makes for a small device that is easy to clean and fits perfectly within a GMP-certified facility. Whether you’re trimming wet or dry, the M108S is a welcome addition and powerful trimming solution to a modern harvesting workflow.
Key Features
- Tumbler offers 50% more access to cutting blades than any other trimmer
- Dent-proof, rust-proof tumbler trims wet or dry
- 3 case-hardened blades offer 108” of cut length
- All-in-one design: Fully integrated trim separator and vacuum
- User controllable tumbler speed, blade speed, vacuum power, and tilt
- Run two units tandem for over double the production
- Easy to clean and GMP-ready
What Comes In The Box?
- Mobius M108S Trimming Machine
- (x2) AirThread Tension Tumbler
- Spring Jack
- Hand Pump
- Input Hopper
- Output Chute
- (x2) Trim Tote with Gasket
- (x2) SS Fan Housing Exhaust Filter
- Belt
- Tandem Lock Set
- Conveyor Sensor Override Puck Set
- Electrical Filter Bracket
- (x2) Elextrical Box Filters
- 15 ft. Power Cord
- Instructions & Reference Posters
What Seperates the Mobius108S from other Trimming Machines?
- AirThread Tension Tumbler
- TriFlex Blade System
- Integrated Separation System
- Variable Function System
These key componets are what separates the Mobius M108S from any other trimming machine in the world.
AirThread Tension Tumbler
Innovative in design. Unrivaled in performance. The Mobius AirThread Tension Tumbler has changed trimming forever. Unlike rival machines that use perforated stainless-steel drums that can be rough on product, hard to clean, and easily damaged, the patent-pending design of the AirThread Tension Tumbler makes it impervious to impact damage while gentle on flower. The AirThread Tension Tumbler is made from a single strand of aircraft grade stainless steel cable over 300-feet (91.5 meters) long, woven 90 times to form a 36-inch (91 cm) tube.
This unique and patent-pending design not only allows Mobius tumblers to be rust-proof, but also dent-proof, as they become flexible when removed. When locked into place, the AirThread Tension Tumbler becomes perfectly cylindrical, allowing for a very small distance between it and the blades which, in turn, allows for a close, consistent trim. Stainless-steel cable construction offers industry leading 0.25-inch (0.635 cm) gaps for maximum cutting blade access – more than 50% greater than traditional tumbler designs. This enables a faster trim time (product spends less time in the tumbler), less surface area to collect resin (reducing cleaning time and precious resin loss), and a closer trim.
AirThread Tumbler vs Punched Steel Tumbler
A perfectly circular tumbler is absolutely critical for tight and consistent trimming. Punched stainless-steel tumblers are often slightly oval or teardrop shaped due to the way they are rolled and welded into a cylinder. They can warp over time and get flat spots when bumped or dropped during removal and cleaning. s
To compensate, trimmers with punched steel tumblers allow cutting blades to be adjusted and “dialed-in”. But this too is a problem as it introduces user error, and the blades need to be set for the furthest point of contact causing gaps along the tumbler’s length.
The Mobius AirThread Tension Tumbler uses spring tension to maintain a perfectly cylindrical shape. The gap between the tumbler edge and cutting blades remains the same, offering a consistent, tight, top-quality trim. Blades never need adjustment so they are free from user error.
TriFlex Blade System
Each of the three self-sharpening blade cartridges are set side-by-side, giving flowers three cut-point opportunities with each pass of the tumbler. Your product is trimmed faster and spends less time in the tumbler, minimizing the risk of impact damage. Each of the three self-sharpening blade cartridges are set side-by-side, giving flowers three cut-point opportunities with each pass of the tumbler. Your product is trimmed faster and spends less time in the tumbler, minimizing the risk of impact damage.
Integrated Separation System
With the Integrated Separation System, both the trim separator and vacuum are built directly into the body of the M108, vastly reducing the footprint required for trimming equipment. The Integrated Separation System has an entirely hose-less design. That means there are no hoses to clean or dispose of. By removing hoses from your trimming process, you remove one of the major obstacles to upholding GMP standards in your harvesting workflow.
Variable Function System
The Variable Function System gives users control to optimize their machine to suit any moisture condition, strain type, or end-product requirements. If you are trimming dry and want a gentler process, reduce the suction and tumbler speed. If you have a higher QC tolerance, raise the tilt and send product through faster. You can determine for yourself the right settings to get your ideal product, every time.
Features & Benefits of the M108S
Gentle on Flower
with unrivaled feed rate
Being gentle onyour product is a function of minimizing the number of times it goes around the tumbler while touching it as little as possible. Flower should move through the trimmer efficiently with lots of blade access, cradled by a tumbler that has minimal surface area to block it or collect resin. The Mobius AirThread Tension Tumbler is made of stainless steel cable which means your flower has very little surface to touch and more access to blades than any rival trimmer. Resin stays on the flower where it belongs. Three independent blade cartridges offer three times the cutting power, resulting in your product being trimmed to perfection at a quality and rate unmatched by any other trimming machine on the market.
Easy To Clean
& GMP Ready
Not only does the semi-enclosed M108S create less mess, but cleaning it is easy and quick – reducing labor costs. Breaking down the M108S is nearly tool-less, and designed so that all plant touching components are “hot swappable“ in minutes. Quickly replacing dirty components with fresh ones maximizes production time, keeping your trim-team trimming, while your sanitation crew cleans in parallel.
Good Manufacturing Practices, commonly referred to as GMP, are an internationally harmonized set of standards that ensure manufacturing facilities are clean, and produce products for human consumption that are both consistent and free from cross contamination. The M108S is a perfect fit for GMP certified organizations because its smooth internal surfaces and high-quality construction materials make it easy to clean. It is also designed without the use of hoses that are almost impossible to clean to GMP standards.
Simple & Safe
To Operate
The M108S uses a variety of indicator lights and sensor technology to offer a safe and worry-free trimming experience. The system automatically shuts down if a panel is removed, the lid opens, the in-feed hopper or output chute are misaligned, or the trim-tote is full.
The tumbler chamber glows red to immediately indicate a fault status, blue to denote ready for trimming, and white when in operation.
Tandem Trimming
Cost-Effective, Scalable, Efficient
Increase production by more than double when a second M108S is connected in tandem.
Two trimmers working independently require two crews to operate and a second conveyor system for automation. Our tests have shown that tandem configuration has a faster feed rate and yields more top-quality trimmed flower.
This configuration is more space efficient and is less costly to operate due to fewer people being involved and less automated infrastructure to purchase and maintain.
Tandem Trimming with Mobius Conveyors
Flexible conveyor solutions for increased automation.
Automation is the key to consistent, top-quality processed flower. The best way to consistently feed your M108S Trimmer or seamlessly move plant material to the next stage of processing are our Mobius conveyor solutions. Full automation means less people are required to processes your harvest, reducing processing costs, the potential for product contamination, and the uncertainty associated with seasonal or temporary workers.
One Mobius Unit
| Wet Trim | Dry Trim |
|---|---|
| 66 - 120 lbs/hr | 30 - 60 lbs/hr |
| 30 - 55 kg/hr | 13 - 30 kg/hr |
Two Mobius Units
| Wet Trim | Dry Trim |
|---|---|
| 110 - 260 lbs/hr | 70 - 140 lbs/hr |
| 50 - 120 kg/hr | 30 - 65 kg/hr |
Specification for the Mobius M108S Trimming Machine
| Trim Style | Throughput |
|---|---|
| Construction | Anodized Aluminum & 304 Stainless Steel |
| Speed Adjustment | 1-11 |
| Number of blades | 3 |
| Blade Treatment | Nitred |
| Power Requirements | 3 PHASE, 208V, 22 AMPS Single PHASE 240V, 30 AMPS |
| Vacuum Motor | 5 HP |
| Cutter Motor | 3/4 HP |
| Vacuum Motor | 5 HP |
| Tool-less disassembly | Yes |
| Tandem Ready | Yes |
| Integrated Tilt Angle | Yes |
|---|---|
| Fits Throguh 32" Door | Yes |
| Tumbler Diameter | 8" |
| Tumbler Length 36" | 3 |
| Width | 43" |
| Length | 43.5" |
| Length with Shrouds in palce | 77.5" |
| Height | 47" |
| Weight | 450 lbs. |
| Warranty | 1 Year |
| Certifications | ETL (CSA & UL EQUIVALENT) |
We recommend these products
- Our Company
- Popular Searches
- Customer Service
- Commercial Pricing
- Shipping Policy
- Returns & Replacements
- Manufacturer Warranty
- Payment Methods
- My Account
- Recieve push notifications
- 500 Orient Street Suite 150
Chico, CA 95928 - Phone: 888-815-9763
- Fax: 888-582-0009
- Send Us a Message
-
Payments accepted:
© 2011-2023 Hydrobuilder.com - 500 Orient Street Suite 150 , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.