|5 star :|
|( 2 )|
|4 star :|
|( 2 )|
not to shabby
Overall the ordering was quick and convien. they did what they said they we going do and to me thats good business!
Review by fisker no moreon January 1, 2019
Great dry trimmer, especially for the price!
We put this thing to an 8 day run right out of the box at 8 - 10 hours per day and it kicked ass. We found that cleaning the blade with a razor blade and dumping out and shaking out the collection bags every 2 - 3 hours kept it running at peak performance. One of the smaller red o-rings did wear out a couple days into its first trim, but they include a couple of spares and I will be getting a pack of spare, heavy duty black o-rings for back up. Shipping was fast and delivered in heavy duty shipping crate with hinges and latches (well protected from damage). You need to find just the right downward angle to make sure you get a good trim, but tilted enough so buds fall into bin when trimmed sufficiently. We did so by adjusting threaded legs and some wood shims. The suction from the fan is also adjustable with sliding vent near fan and can be fine tuned as well. We found that different strains behaved differently and would adjust accordingly. We would occasionally quickly run buds back through trimmer for super clean cut if required. For the money, size, blade/motor, suction fan, and collection bags, this trimmer cannot be beat for the money. Final product is shelf ready.
Review by Jakeon September 1, 2018
Nice machine overall with some quirks
First off I received the machine with a hose that did not fit, 5” wire enforced hose to fit on a 4” fitting? Hydro builder was fantastic with helping me get up and running even though centurion said this is what they found works best? The machine does cut really well and cut my time down to less than half. Overall build quality seems decent with some rough welds and my fan had its grill just cut out leaving very sharp edges I had to file. I got the feeling that they ran a sale to get rid of machines that might have been some of first run stuff where they hadn’t figured out a process to clean things up. Maybe needed to regain some capital before more r&d. You do have to take apart the machine every 2-3 hours because you will get buildup on the cutting blade which is extremely sharp so be careful. Also the alignment wheels that keep the barrel in place have some junk red o rings on them. They send you extra and I blew through all of them within a few hours of run time. I used normal black rubber o rings out of a kit I had And no problem since. I probably have 10-15 hours on my machine and I’m glad I bought it because of time savings. Their MSRP is crazy in my opinion. I’m glad I got mine on sale because if I would of paid 4500 I would have been upset with all of the quirks the machine had.
Review by Pitbullguyon January 21, 2018
worked better after reassembeling drum and shims that fell out
Worked well but was noisy found shims and inspected, One screw inside drum came loose and dented both drum and blade. And bent drum rib.
Once proper screw was found and shims replaced and all tightened, it cut good.
Review by sunandsoilon October 2, 2017