Titan Controls continues to bring you the top quality controllers that you've come to expect, built right here in the USA!
The Helios 17 - Twenty-four (24) light controller with timer provides up to 24,000 watts of lighting control. This 'Professional Series' commercial lighting controller is built using industrial grade Allen Bradley components, one of the most respected names in the industry!
Product Usage Diagram:
- Controls up to 24 1000 Watt HID lights at 240 Vo
- The only lighting controllers featuring industrial-grade Allen Bradley circuit breakers and ballast rated relays
- Two trigger cord sets activate lighting banks via external timers
- Sequenced lighting delays for each light bank
- ETL listed for use in commercial applications
- NEMA 6-15 UL listed 240 VAC power outlets
- 150 Amps/ 240 Volt = Input power
- 120 Amps/ 240 Volt = Output power
- 60 Hz.
- Single phase power required
- 3 year warranty
- Tech Specs
Brand Titan Controls SKU HGC702840 Weight (lb.) 52.35 Length (in.) 30.25 Prop 65 No Width (in.) 28.75 Height (in.) 8 Warranty 3 Year Lead Time Ships in 7 Days UPC 847127002100 UL Listed No Outlets Twenty Four (6-15) 240V Outlets Has Photocell No Voltage 240V Exact Watts 24,000W Frequency 60 Hz
- Product Q&A
Titan Controls Helios 17 - 24 Light 240 Volt Controller w/ Dual Trigger Cords Questions & Answers
Does my Titan Controller need to be calibrated?
No, your controller has been factory calibrated and is ready for service when you take it out of the box. Each unit will provide years of use and will maintain its settings without any further changes required.
How does the quality and reliability compare to other brands of controllers on the market?
Titan Controls believes these products to be the best quality, most reliable environmental control products on the market. They are made with very robust, premium grade components to provide years of service. The housings are made on the same high-end sheet metal & powder coating equipment that makes Sun System brand reflectors.
Are Titan Controls digital or analog controllers?
Both! Titan uses digital control boards on most of the controllers, but simplifies the use of them by having analog (manual knobs & switches) controls to operate the devices. This eliminates the need to scroll through complicated electronic menus.
Are the Titan Controllers compatible with each other?
Yes. They are designed to work together so you may expand your system as needed.
Can I use Titan Controls with other manufacturer's equipment?
Yes, Titan Controls gear is compatible with all other manufacturer's equipment currently on the market today. It is designed to interface with any equipment that's 120 Volts and uses a standard NEMA 5 plug configuration. Be careful not to exceed the total recommended amperage stated on the controller.
What happens to the 'preferred settings' on my Titan Controller if I lose power?
Titan Controls digitally based equipment has 'non-volatile' memory storage that allows the unit to retain settings due to a loss of power. The analog product line settings are not affected by a loss of power and will maintain dial settings.
What are the 'trigger cords' for?
The 'trigger cords' activate and deactivate your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 18 lighting controller. When the trigger cords activate the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cords defeat the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cords' into a 120 Volt 24 hour appliance timer (we suggest Apollo 8 or Apollo 9 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. Two trigger cords allow the grower to stagger light ON times or have two separate timing schedules. See application diagram for more information.