Titan Controls Product Documents
The Hades 2 controls up to two light banks via your lighting controller trigger cords'!
The Hades 2 is designed to control HID lighting, a recycling timer for pumps or CO2 enrichment and a nighttime output for use with a circulation fan or heater. It can control up to 1200W (600W per outlet) of HID lighting and incorporates an internal temperature sensor, which will automatically shut down your lights if the 'maximum temp setting' is exceeded. It also features a 30 second preset time delay between the 2 lighting outputs, an internal clock with a battery back up and a 'hot start delay' setting that controls the cool down period for your lights in case of power outages.
Product Usage Diagram:
- Can be set to run in day only, night only or 24 hour mode.
- 15 Amps - 120 Volts - 60 Hz
- 3 year warranty
- Tech Specs
Brand Titan Controls SKU HGC702856 Weight (lb.) 4.5 Length (in.) 12.4 Prop 65 No Width (in.) 9.1 Height (in.) 6.6 Warranty 2 Year Lead Time Due to social distancing requirements, this item ships in 2 weeks UPC 847127006634 UL Listed Yes Number of Lights Controlled 4 Has Photocell No Voltage 120V Amps 15 Frequency 60 Hz
- Product Q&A
Titan Controls Hades 2: Digital Recycle and Light Timer w/ High Temp Shut-Off Questions & Answers
The Hades 2 has no power?
Verify power source is providing 120 Volts A/C. Reset the circuit breaker on the Hades 2 by turning off the unit, then turn on.
Does the temperature sensor need to be calibrated?
No. The temperature sensor is digital and there is no need for calibration.
My temperature is reading quite high?
Verify that the sensor is not in a location with direct exposure to intense light and that there is air circulating freely around it.