Titan Controls Product Documents
The Atlas 4 controls (500 PPM to 2000 PPM) and monitors (500 PPM to 5000 PPM) CO2 in two areas. It comes with two remote room sensors with 25 foot cables and has integrated 24 hour data logging feature built-in.
- Controls CO2 in (2)two rooms from 500 to 2000 parts per million (PPM)
- Monitors CO2 in two room from 500 to 5000 PPM
- Two (2) remote room sensors with 25 foot cables (included)
- Can control both bottled CO2 tanks or CO2 generators
- Integrated 24 hour data logging feature built-in
- ETL Listed for use in commercial applications
- Easy to use and simple to operate
- Doses each room at different PPM settings, if required
- 10 Amps - 120 Volts - 60 Hz.
- 3 year warranty
Caution: Sulphur vaporization can damage your controller! To protect your controller, it is important to disconnect and cover the Atlas 4 by wrapping with a plastic bag OR remove the controller from the grow area while using sulphur vaporizers in your grow room.
Product Usage Diagrams:
- Tech Specs
Brand Titan Controls SKU HGC702610 Weight (lb.) 4.2 Lead Time Ships in 6-7 Business Days Length (in.) 10.7 Width (in.) 6.5 Height (in.) 6.5 Warranty 2 Year Prop 65 No UPC 847127000915 UL Listed No CO2 Sensor Type Remote CO2 Sensor Number of Zones Dual Zone Has Photocell No Power Cord Length 25' Amps 10 Voltage 120V
- Product Q&A
Titan Controls Atlas 4: 2 Room CO2 Monitor/Controller Questions & Answers
Do I have to have both sensors plugged in if I'm only going to run one room?
Yes, you need both sensors plugged into the Atlas 4 for the product to function properly.
I just plugged my Atlas 4 in and it doesn't provide a 24 hour data logging reading?
The Atlas 4 needs to be functioning for a minimum of 24 hours prior to providing any data logging information. After 24 hours it will give you a CO2 low level, CO2 average level and the CO2 high level for your selected hour. This will allow you to chart your CO2 levels over a 24 hour period and accurately track your CO2 levels.
Does my Titan Controller need to be calibrated?
No, your controller has been factory calibrated and is ready for service when you take it out of the box. Each unit will provide years of use and will maintain its settings without any further changes required.
Are the Titan Controllers compatible with each other?
Yes. They are designed to work together so you may expand your system as needed.
Should I run my CO2 at night?
No, you should not. Plants photosynthesize CO2 only during the daylight hours. At night, the plants expire CO2 and have no use for CO2. Save yourself some money and only dose CO2 during daylight hours when it does the most good for the plants.
What methods can I use to enrich CO2 in my indoor garden or greenhouse?
The two most common methods are using a CO2 generator/burner or bottled CO2. The most common generator/burner uses LP (liquid propane) gas from a tank or a NG (natural gas) conversion kit that allows you to hook up your generator/burner to the natural gas line in your house. The other option is to purchase bottled CO2 from a local supplier in your area and control its release into your garden area using a Titan Controls CO2 controller (Atlas 1) or short cycle repeat cycle timer with photocell. It should be noted that there is no advantage to increasing CO2 levels beyond 2000 PPM for most greenhouse plants. The optimum level of CO2 for plant growth is generally accepted at 1200 - 1600 PPM.