Sluice Box MJ Cone Filling Machine

The Sluice Box MJ Cone Filling Machine Is A Great Addition For All Dispensary And Commercial Grow Facilities! With The Ability To Pump Out Thousands of Pre-Rolls An Hour!

The Sluice Box MJ Cone Filling Machine is made with all Food Grade Material or better! Each cone cartridge will do over a thousand pre-rolls per hour and with the ability to apply a new cone cartridge every five to ten minutes gives an opportunity to do thousands of pre-rolls per hour. Holes in cone cartridge are or oversized 5000th to accommodate different brands. The bottom of cone cartridge is tapped to apply shim if needed for height. The Sluice Box MJ Cone Filling Machine will process 325 1 Gram cones or 406 Half Gram cones.

Sluice Box Cone Filling Machine Included Products

• Base
• Tray with Cone Cartridge - Choice of (84mm/ 1 1/4) 0.5 Gram or (98/109mm) 1 Gram
• Top
• Packer
• (2) Set of Dividers

Sluice Box Cone Filling Machine Basic Directions

• 1. Place base on level surface
• 2. Place tray on base
• 3. Set cone cartridge over tray, make sure tray lifts freely from base upwards to bottom of cone cartridge
• 4. Load pre-roll cones into cartridge holes
• 5. Place top over cartridge
• 6. Apply material evenly across top
• 7. Press power button on , move material to corners if needed or until material is gone from top
• 8. Remove top
• 9. Move any excess material into cones
• 10. Optional place packer on cartridge and then remove
• 11. Lift up on tray, prerolls will rise up from cone cartridge move off of base and set to side making sure tray is supported in up position
• 12. Note: depending on material, variations can apply to step 5 through 10 for pack and fill and amount of time or quick presses of on button. Also applying small amount of pressure with hand to cone cartridge will decrease amount to vibration if desired .
• 13. Step 10 packer can be raised or lowered by six screws on top for desired depth of pack
• 14. If using dividers place in desired location on cone cartridge then put top on and line up dividers with dividers in cone cartridge. This allows sluice box to run more than one strain at a time or smaller amounts if desired.