Quest Hi-E Dry Dehumidifier

Quest Hi-E Dry Dehumidifier


Be the first to review this product

Quest Brand Product
$2,569.95 - $6,316.95

Lead time: Please select an option below


Quest HI-E Dry dehumidifiers can be used standalone or in ducted installations.

Get the flexibility you need in an economical package with the Hi-E DRY 120 or 195 Dehumidifiers.

Note: The Quest Hi-E Dry does NOT INCLUDE communication wires and CAN'T be wired to a humidistat

Hi-E DRY dehumidifiers are designed and built with emphasis on efficiency and durability. Today’s Hi-E DRY dehumidifiers remove up to seven pints of water per kilowatt hour, while the industry average remains at only two to three pints.

The high-efficiency design of Hi-E DRY dehumidifiers offer more than just dramatically reduced utility costs. The larger water removal capacity from a smaller, more efficient refrigeration system eliminates the need for 220 volt circuits in many applications. The smaller refrigeration system allows Hi-E DRY 120 & 195 dehumidifiers to cost less than other commercial dehumidifiers of equal capacity.

The Hi-E DRY high efficiency dehumidifier utilizes refrigeration to cool the incoming air stream below its dew point as it passes through the dehumidification (evaporator) coil. This cooling results in the removal of moisture (latent heat) and reduction in temperature (sensible heat). The cooled and dried air is used to precool the incoming air stream resulting in up to a 200 percent increase in overall efficiency. After the precooling stage the processed air is reheated by passing through the condenser coil. The latent heat removed by the evaporator coil is returned to the air stream at this stage as sensible heat, resulting in an overall temperature increase from the incoming air.

Features & Benefits of the Hi-E Dry

  • Controlled by a dehumidistat with settings from 20 to 80 percent relative humidity and a positive “on” and “off” setting.
  • Portable and provided with four casters.
  • Contains an internal condensate pump capable of lifting condensate 17 feet and 20 ft(195)/30 ft(120) of condensate hose.
  • Wiring is through a factory installed six foot power cord; 115 volt with ground.


Model: Hi-E Dry 120
Supply Voltage: 115 VAC 5.9 amps - NEMA 5-15P
Power: 680 Watts @ 80°, 60%
Water Removal: 120 pints (80°, 60%)
Blower: 445 CFM
Operating Range: 40°F–110°F
Dimensions: 20" x 42" x 19" | 121 lbs.
Shipping Dimensions: 26" x 47" x 24" | 145 lbs
Warranty: 5 Years
Model: Hi-E Dry 195
Supply Voltage: 115 VAC 13.1 amps - NEMA 5-20P
Power: 1500 Watts @ 80°, 60%
Water Removal: 195 pints (80°, 60%)
Blower: 610 CFM
Operating Range: 40°F–110°F
Dimensions: 20" x 42" x 19" | 130 lbs.
Shipping Dimensions: 26" x 47" x 24" | 145 lbs
Warranty: 5 Years
Tech Specs