NugSmasher PRO 20 Ton Pneumatic/Manual Rosin Press Kit

The NugSmasher PRO Rosin Press - For Extraction Experts!

The NugSmasher PRO is a 20 Ton Pneumatic (or manual) operated Rosin Press manufactured and assembled in Corona, CA. It is constructed of solid steel with T6 6061 Aluminum pressing plates and control panel bezel. The frame is fully fabricated and CNC machined in-house. NugSmasher backs each product with an unmatched warranty on every component of the system.

The NugSmasher PRO is a flexible system offering 3 different platen size options with custom platen options available if needed. The machine comes standard with our Big Boy plates at 7″ x 10″. Optionally, the PRO can be outfitted with our split plate design with two 10″ x 2.5″ . Matched alignment/centering racks are available for each platen type to make loading a breeze and ensure your material stays in place as you lift the press.

Platens are installed with machined alignment assemblies on both sides of the lower plate. These assemblies allow perfect alignment every time. All platen styles are setup to accommodate 3 heating elements in each of the top and bottom plates. Standard installed heaters are 160W ea (480W per plate total), which allows the unit to warm up to useable temps in as little as 5 – 10 minutes and also allows the unit to operate on less than 9 amps of power.

A built in pressure gauge lets you track results as you dial your process in and allows for more repeatable results. Custom machined handles for manual operation and pressure release are standard with every system. Individual circuit breakers help isolate any wiring related issues to minimize risk of shock and protect components on un-faulted circuits.

The NugSmasher PRO makes use of simple, yet reliable PID controllers with an accuracy of 0.2%. Top and bottom plates are individually controlled to ensure you are getting the right temps throughout the platen. Temperature can be set to read in Fahrenheit or Celsius.

Nugsmasher Pro can be used pneumatically with compressed air. Any air compressor with a working pressure between 90-120 psi and has a 3 gallon or larger tank works great. Recommended to be used with a water sperator attached to the compressor and inlet size is 1/4 in -18 npt into machine. Air Compressor and water separator are not included with Nugsmasher purchase.

What is included with the NugSmasher Pro Rosin Press?

The NugSmasher Difference

Plug-N-Play

The Nugsmasher product line-up are all Plug-N-Play presses. Simply plug into your power supply and turn unit on and you are ready to start extracting!

Temperature Controls

The Nugsmasher product line-up offers precise temperature control of the heat plates. Just set your desired temperature and the controllers will bring the plates to temp and keep them consistent throughout your pressing session.

Thermally Isolated Heat Plates

The top plates of the Nugsmasher line-up are thermally isolated. This design minimizes undesired heat transfer away from your pressing area. This helps maintain efficiency as well as maintaining your desired temps on the plates.

Steel and Aluminum Construction

Solid interlocked USA structural steel creates the frame of the Nugsmasher product line-up offering well beyond the individual pressing abilities. Aircraft grade aluminum is fully CNC machined in-house and is used for the pressing plates.

Heat Plates

No other press offers the flexibility in pressing preference found with the Nugsmasher line-up. Our customers have spoken and we’ve listened! Providing the proper machine and accessory for the master extractor’s every need.

Heaters

The Nugsmasher product line-up is equipped with specific purpose designed heat cartridges on each of the top and bottom plates allowing for a quick start-up, more even heat disbursement, and better maintained target temps throughout your pressing session.

Circuit Protection

The Nugsmasher is a well-equipped machine requiring multiple power circuits to make everything run properly. With safety in mind, our electrical engineers have routed each of the 3 sub-circuits as well as the primary power circuit through high quality, resettable circuit breakers which are neatly mounted to the front panel for easy monitoring and access to reset them if needed.