NugSmasher DIY Rosin Press Plate Set with Automatic Heat Control

NugSmasher DIY Rosin Press Plate Set with Automatic Heat Control

SKU #: NS-DIY

Be the first to review this product

NugSmasher Brand Product
$249.96 - $339.96

Lead time: Please select an option below


Overview

The do-it-yourself Rosin Press Extraction heated Plate Set is perfect for the extractor that has their own press and pressure figured out.

  • Control box is made of solid steel
  • Powder Coated finish
  • Power circuit protected
  • Digital heat control
  • Industrial rubber feet
  • 6' power cord
  • 24" heat shielded plate power cords
  • Reversible machined heater wire plate caps
  • Made in the USA.

2.5" x 2.5" x 1"
These are the plates and heaters used on the NugSmasher MINI. Recommended press and ram pressure is 1 to 5 tons.

  • 70 watt heaters in each plate
  • 2.5"x 2.5" solid 6061 plates
  • Thermocouple installed in the bottom plate and is interchangeable to top if desired
  • Adapter plate with 1" diameter ram hole with 4x 1/4-20 ss set machine screws

4" x 4" x 1.2"
These are the plates and heaters used on the NugSmasher OG. Recommended press and ram pressure is 1 to 12 tons.

  • 160 watt heaters in each plate
  • 4"x 4" solid 6061 plates
  • Thermocouple installed in the bottom plate and is interchangeable to top if desired
  • Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws

4" x 6" x 1.25"
These are the plates and heaters used on the NugSmasher XP. Recommended press and ram pressure is 1 to 12 tons.

  • 2 x 160 watt heaters in each plate 4 total
  • 4"x 6" solid 6061 plates
  • Thermocouple installed in both the bottom and top plate
  • Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws

7" x 10" x 1.5"
These are the plates and heaters used on the NugSmasher PRO. Recommended press and ram pressure is 1 to 30 tons.

  • 3 x 160 watt heaters in each plate 6 total for even heat distribution
  • 7" x 10" x 1.5 solid 6061 USA Kaser Aluminum plates
  • Thermocouple installed in both the bottom and top plate
  • Adapter plate with 2" diameter ram hole with 4x 1/4-20 ss set machine screws
Reviews
Tech Specs