King Electric LPW Series 2 ComfortCraft Wall Heater

King redefines comfort with a sleek and modern new architectural design

Offering higher output than our industry-leading PAW heater. King’s exclusive dual Pic-A-Watt steel fin elements allow customers to select from a range of wattage options, tailoring the heater to an area’s specific heating requirements. With up to 4500W, this is our most popular large wall heater, used in both residential and commercial applications. Standard with a 3-position Heat/Fan/Off Switch and a fan delay to help dissipate heat from the high-mass steel plate-fin elements thereby prolonging heater life and increasing energy efficiency. The high-quality built-in thermostat has degrees on the label so temperature selection is easy and accurate. Now Available in 4 design colors to match any decor: White Dove, Oiled Bronze, Satin Nickel, and Almondine.

Features & Benefits

• Modern Design That Redefines Comfort
• Multiple Wattage Options, to Tailor to a Room’s Specific Heating Requirement
• High Quality Built-In Thermostat
• Patented Smart Limit Protection
• Long Life Unit Bearing Motor
• Selector Switch: Fan/Heat/Off
• Proudly Made in the USA with U.S. & Global Materials
• 5-Year Limited Warranty

The Art of Comfort Heating

Featuring a modern architectural design and King’s patented Smart Limit Protection®, LPW ComfortCraft offers refined comfort for making Residential and Commercial spaces more comfortable. King’s exclusive Pic-A-Watt element, allow customers to select from a range of wattage options, tailoring the heater to an area’s specific heating needs.

The Original Pic-A-Watt® Multi-Wattage Element

King’s exclusive Pic-A-Watt element means the heater can easily be tailored to a room’s specific heating requirements. For smaller areas, choose a lower wattage to efficiently heat the room. For larger rooms, choose a higher wattage and maximize comfort. It’s easy as unplugging a wire to select the wattage during installation.

Engineering Specifications

Motor

Heavy-duty, cast iron, unit bearing, permanently lubricated with 20cc oil reservoir, 1440 RPM. Enclosed impedance protected with intake air cooling motor for increased bearing life

Fan

High efficiency, dynamically balanced 5-blade aluminum fan. 185 CFM.

Elements

Element assemblies consist of three steel sheathed heating tubes in a furnace-brazed, plate-finned, block design. Each sheathed tube shall contain coiled Ni-Chrome wire embedded in an insulator of Magnesium Oxide. The element assembly shall provide up to seven (7) possible wattage configurations available for selection during field installation. The use of external resistors, diodes, or other weak links to obtain multiple wattages will not be acceptable.

Thermal Overload

Heaters are equipped with King’s patented thermal overload Smart Limit Protection®, which disconnects the elements and motor in the event normal operating temperatures are exceeded. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes. Automatic reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be accepted.

Fan / Heat / Off Switch

3-position switch provides heating and summer fan-only operation. The DPST off switch provides a “positive off” that disconnects all ungrounded conductors.

Wall-box

20 gauge electro-galvanized steel with factory installed ground-wire. Minimum 4”clearance to floors and 6” to sidewalls. Zero clearance to combustibles in the wall. Recommended 10” clearance to floors and 16” to sidewalls.

Grill

R20 gauge steel finished in a glossy white, powder-coated paint.

Options

Retrofit grill, and surface wall-box.

Approvals

cULus (E41422)