Kalix Grow 30-10-10 + Chelated Micronutrients, 25 lb.

Guaranteed Analysis:

N-P-K: 30-10-10

• Total Nitrogen(N)........30.0%
  • 2.1% Ammonical Nitrogen
  • 3.3% Nitrate Nitrogen
  • 24.6% Urea Nitrogen
• Available Phosphate(P ₂ O ₅ )......10.00%
• Soluble Potash(K ₂ O)...........10.00%
• Boron(B)..........0.02%
• Copper(Cu)..........0.05%
  • 0.05% Chelated Copper
• Iron(Fe)........0.10%
  • 0.10% Chelated Iron
• Manganese(Mn)........0.05%
  • 0.05% Chelated Manganese
• Molybdenum(Mo)........0.005%
• Zinc(Mn)........0.05%
  • 0.05% Chelated Zinc

Compatibility:

30-10-10 may be applied separately or in conjunction with most pesticides and fertilizers. Note, adding wetting agents often enhances nutrient availability. DO NOT use with basic metal sulfates, strongly alkaline materials (such as hydrated lime and lime sulfur), or spray oils. A compatability test is recommended if the desired combination has not been previously used. Tank mixtures with copper-based products can be phytoxic due to increased solubility of copper. Apply the spray solution to a small test area beore general applications to determine any undesireable phytoxic effects.

Mixing:

Dissolve the recommended amount of this product into approximately one half of the required water. Slower add the remaining water while maintaining constant agitation. Water quality and temperature will determine maximum solubility. Warmer water temperatures increase solubility and shorten dissolving time. As this product goes into solution, the water temperature will drop. It is important when preparing concentrated solutions to allow for this drop in temperature. This ensures that the fertilizer is completely dissolved. DO NOT exceed 2 lbs. 30-10-10 per gallon of finish spray.