Ju1ceBox Handheld Rosin Press Starter Set is no longer available

Ju1ceBox Handheld Rosin Press Starter Set Questions & Answers

How does the Ju1ceBox handheld rosin press work?
The Ju1ceBox is engineered to ensure the perfect combination of heat and pressure to a surface area for personal use. Its compact size makes it not only portable, but also a fraction of the cost compared to similar products on the market. With no need for dangerous gases or large hydraulic components, anyone can safely access solvent-less extracts.

How do I know my Ju1ceBox rosin press is not going to break?
All parts of our products are made with the best quality material. We engineered each component to withstand extended use without breaking. Everything is assembled by hand in America, to assure best quality control possible.

What’s a common return rate?
This is primarily determined by the starting material. The JuiceBox handheld rosin press will show you how good your flower really is. Average flower should yield 14-20%, Good flower can get a consistent 20%-25% or up to 30% return rate! We recommend trying no more than a half gram when pressing a strain for the first time, and trying multiple different strains to find one's that produce well.

Why are my yields lows compared to what I see online?
Yields from rosin are primarily determined by the starting material. We recommend trying no more than a half gram when pressing a strain for the first time, and trying multiple different strains to find ones that produce well. Firstly make sure you're following the instructions correctly. You should turn on the unit only AFTER lining up and applying full hand pressure. Another thing to consider is that hash will yield significantly more than flower, and our pre-press will allow you to fit much more material per press. Shop pre-presses click here.

Does the Ju1ceBox rosin presses have a temperature control? How hot does it get?
The size of our plates on our handheld unit guarantees that 80% or more of the surface area is used in each press. This causes the rosin and wide variety of terpenes to exit the plates to a cool, safe zone immediately. In combination with our unique sloped design and heating process, this makes temperature control unnecessary. Once pressure is locked in, and the unit is powered on, the plates will heat from room temperature to 250 degrees. Each terpene melts at a different temperature and will be pushed out one at a time outside the plates, this allows for the highest-quality rosin and maximum yield with only one press!

How much pressure does the Ju1ceBox apply?
Many rosin presses have large plates that increase the total surface area and then require extreme pressures for success. The size of our plates requires significantly less pressure making it easy to be done by hand. Once full pressure has been applied, the Ju1ceBox will lock in place holding up to 300lbs of pressure. This design with our heating process allows anyone to achieve maximum yields possible.

Can I press kief/pollen?
Yes. A small micron bag is recommended when pressing kief, pollen, or shake. We provide 2 different sized micron bags, each is sized perfect for the plates on either or handheld or twist style units. Shop for rosin bags click here.

What is the best humidity to keep flower for pressing?
Avoid using dry or older material. As any plant material ages, the terpenes disintegrate into the air and will produce a lower quality product. 62% relative humidity works best for preserving most terpenes. So, make sure there is significant moisture.

How important is it align correctly?
When using the Ju1ceBox, it important that there is no material overhanging. This means that the starting material should be completely inside the plates. Any overhang acts like a sponge and will soak up any product it comes into contact with. Our pre-press will compact a large amount of material into a perfect sized puck for our plates. Shop pre-presses click here.

How know i'm applying enough pressure?
Once the material is aligned, apply full hand pressure using both hands by squeezing with entire hand strength. The Ju1ceBox will produce a very similar yield even if you only squeeze with one hand, but most consumers want to maximize what they get from each press. You can lean into a table or counter with your hands wrapped around the clamp handles to get the maximum pressure, and the Ju1ceBox is built to handle that. Nevertheless this extra bit of pressure is not entirely necessary for good yields, and will increase the wear on your unit. When applying pressure, if you see the handles of the clamp bending towards eachother then you have already reach maximum pressure. If you believe you have very low hand strength or are concerned you can't apply the same pressure as an average adult, we reccomend looking at our table top unit.