- Home /
- Grow Lights /
- LED Grow Lights /
- 1000 Watt LED Grow Lights /
- Iluminar Hypermol PRO 1450 Watt LED Grow Light
Iluminar Product Documents
Truly Full Spectrum for the Full Plant Lifecycle
ILUMINAR Lighting new HYPERMOL™ encompasses the latest LED and fixture design technology. The result of years of product development and refinement, HYPERMOL™ delivers full spectrum light, rich in both blue and red, that’s ideal for the full plant lifecycle. The increased blues helps to reduce internodal stretch during the transition and early flower, while the predominant reds drive generative production.
What's included:
- HyperMol PRO 1450 Watt LED Grow Light
- Cable Logic AC Power Cord, 10 Inch - Select voltage
- Cable Logic Main-Line AC Extension Cable, 6 Feet
Evolved, Efficient, and Easy!
We’ve taken plug n’ play all the way with our latest high-performance LED grow light. Simply unfold your new HYPERMOL™ fixture, hang it up, and you’re pretty much done! No tools are required. No light bars to screw in. HYPERMOL comes ready to grow and is compatible with all our 0-10V controllers, and many others.
View the entire Hypermol lineup
*The Hypermol 1450 and Hypermol PRO 1450 have a few key differences. The Pro 1450 is comprised of 6 wider LED bars while the standard 1450 is comprised of 12 thinner LED Bars. The results is a slight uptick in PPF for the PRO at 4060 µmol/s compared to the 3915 µmol/s for the non-PRO
Optional Upgrade: Iluminar Touch+ Grow Light Controller
The ILUMINAR Touch+ Controller will now allow you to control up to 60 lights per zone or room, with two channels you can control up to a total of 120 lights. This will take even your beginner garden to the commercial level, all of these features packed into the ILUMINAR Touch+ Controller.
The main difference between the Touch+ and the older Touch is greater dimming control. The old Touch controller could only control LEDs down to 50% dimming. The new Touch+ Controller can control dimming on LEDs all the way down to 20%
- LED + CMH + HPS All From One Controller
- Up to 120 Units, 60 fixtures per zone
- Control 2 Independent Rooms
- Auto Temperature Shut-Down
- Sunrise / Sunset Effects
- Battery Backup to Save Data
- Dual Temperature Zone input for High Heat Dimming
- Dual Temperature Probe Inputs
- Touch Screen Technology
- RJ9 to RJ14 cable included
Specifications for the HyperMol PRO 1450
Input Power | Smart Sensing 100V to 277V |
---|---|
Minimum Mounting Height | 6" to top of Canopy |
PPF | 4060 µmol/s |
PAR | 2.8 µmol/J |
Min Power Factor | >90% |
Dimming | 0-10V Controllable |
LED Lifespan (90% of Life) | 50,000+ Hours |
---|---|
Ambient Temperature | 0 - 40°C / 32-104°F |
BTU | 4,947 |
Height | 58mm / 2.3" |
Width | 1105mm / 43.5" |
Length | 1065mm / 41.9" |
Be the first to review this product