Heavy duty, commercial booster pump designed for continuous use. Includes integrated low pressure and high pressure switches. Can be used in conjunction with our float valve. Adjustable pressure dial. Direct 120V plug in. Includes pump protector / inlet filter and 1/2" QC fittings. Does not thermally cycle. Designed to run continuously 24/7. A work horse pump that will power your Evolution-RO1000 to 80 psi and is compatible with other 1000-1500 GPD RO systems to boost them up to 150 psi. Pump requires a minimum of 20 psi to operate.
- Tech Specs
Brand Hydro Logic SKU HL29014 Weight (lb.) 30 UPC 812111012038 Prop 65 No
Customer Reviews 2 item(s)
- worked for me
- Got my pressure up quite a bit. Flows god right now and was easy to set up with fast shipping too.
- Do not buy to increase your water PSI
- I had a very low pressure situation that I thought this would address. Since it was outside I figured a booster designed for constant use would be fine.
The installation instructions were straight forward and easy to understand and install. (the Evo RO is super easy to install). However in my initial installation the pressure was too low to kick the motor on (there is an adjustable "screw"=nut but that didn't seem to do anything helpful).
No returns once water has gone through the pump so I'm out of look. So I tried another scenario where PSI was normal (like 40-60). the RO Pressure gauge showed 40-60 and when I hooked up the pump This LOWERS! the psi at the Evolution RO down to 20! It also would turn on for a second and then off (as if the high psi would shut it off). I can't use it any scenario it seems. Do NOT spend your money on this expensive of equipment from.