If you are a home grower or commercial grower looking for one of the Best Hydroponic Systems money can buy, look no further than the Flo n Gro 12 Site Hydroponic System. This budget friendly, easy to use system is configured with the Oceanus 1 controller, make it incredibly user friendly. If you are looking for your first system or just want something a little easier to use, this is a great choice. Here are some more reasons we love it.
The Flo n Gro 12 Site Hydroponic System is an ebb & flow style of growing, and is a completely expandable multi-site system. You can double the plant count and expand this system to 24 sites using the 6 site Ebb & Flow Expansion Kit (Item #702785), so you can start small and add growth sites as your experience grows.
As mentioned earlier, this ebb and flow system is controlled by the Oceanus 1 controller. It gets activated periodically throughout the day to ensure your plant gets fed an ample amount. When turned on, the Oceanus 1 controller sends a highly oxygenated, nutrient-concentrated water to growth modules. This starts the flood period, where your roots will be drenched in a nutrient solution through a net pot insert.
Then, after a few moments, this nutrient solutions drains from the growth modules and returns to the reservoir, awaiting the next flood cycle. This constant flooding and draining provides the perfect combination of nutrition and aeration, leading to incredibly large plants with potent flowers.
Oceanus® 1 – Flo-n-Gro® 12
Want to learn more about hydroponics ? Check out our complete guide in our blog!
|Growth Module Size||4 Gallon|
|Number of Rows||4 Rows|
|Lead Time||Due to social distancing requirements, this item ships in 2 weeks|
My Flo-N-Gro won't stop pumping water and the system is flooding?
There is a 1/8" siphon hole in the straight fitting that goes into the top of your reservoir. It is just under the top of the lid drilled into the side of the straight fitting. If this hole is covered by the fill hose, the system goes into a constant fill mode and can flood. If you back down the 1/2" tubing and expose the siphon hole, your system will function correctly.
I have 8 Flo-N-Gro GRO sites on a single run and they do not fill evenly before the FILL cycle is completed?
The 3/4" tubing can constrict the water and will not fill all the GRO sites evenly if there are too many sites on a single output port . If possible, try to run even numbers of GRO sites on each output port. For instance, run 2 lines of 4 GRO sites or better yet, 4 lines of 2 GRO sites, and you'll find that they will fill more evenly.
My timer does not seem to be working properly, it just keeps blinking?
The power plug acts like an ON/OFF switch in this product. Always make sure that your Oceanus 1 is unplugged before setting or adjusting the timer. Set your feeding schedule, then set your correct time of day, and then plug your power plug back into a 120 VAC outlet. Oceanus 1 will maintain time and schedule until the power is defeated.
Do I need to clean my Oceanus 1?
Yes, you should clean your Oceanus 1 completely between each crop. For example, you can use a few drops of antibacterial hand soap to clean the Oceanus 1. Just make sure you thoroughly rinse (minimum of 3 times) the Oceanus 1 to remove all soap and debris before using.
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.