AutoPot easy2Grow 40 Site Watering System

Low maintenance, Reliable and Automated

The easy2grow System is the preferred system used by commercial growers throughout the world. It offers maintenance-free growing with optimum growth without wasting a single drop of water. The easy2grow system will water & feed your plants using 2.2 gallon or 3.9-gallon pots without the need for pumps, timers, and electricity. Whether using the easy2grow starter kit or multiple easy2grow extension kits on a vast commercial scale this system provides everything the plant requires.

The easy2grow Systems can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly- tunnel.

All easy2grow Systems come with 2 options for Growth Module Size:

• 2.2 Gallon
• 3.9 Gallon

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday, and still be sure of healthy plants and bumper harvests.

The easy2grow 40 Site System is easily extended so many pots can be linked to a single reservoir. Please see examples of typical layouts using 3/8″ pipe or 1/2″ pipe in the image gallery. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a reservoir is filled with water & mineral liquid feed this extremely versatile system will completely take care of all your plant’s needs.

All AutoPot USA modules are now equipped with the new AQUAvalve5 (gray/black with black collar), which requires 3/8″ tubing/fittings. If you have the AQUAvalve4 (black with red collar) and need assistance in expanding your system with 1/4″ tubing/fittings, please contact us.

easy2grow 40 Site System Includes:

• 1x 105 gal FlexiTank or Pro FlexiTank
• 20x 2Pot tray and lid
• 40x 2.2 gal pots OR 3.9 gal pots
• 20x AQUAvalve5
• 1x 1/2” click-fit tank adaptor & filter
• 2x 1/2″ inline tap
• 1x 1/2” tee connector
• 10x 1/2” – 3/8″ cross connector
• 1x 32ft of 3/8″ pipe
• 1x 32ft of 1/2″ pipe
• 40x Root Control Sheet
• 40x PotSock Square

Optional Upgrade: AutoPot AirDome Kit

If you are lucky enough to have power in your greenhouse or polytunnel this little addition can drastically increase yields! It is very simple to use once assembled, which will take less than 30 seconds. The Air Dome is placed at the bottom of the pot, covered with the substrate, and then connected to an air pump. Oxygen is then supplied directly to the plants’ root zone, improving crop development and ensuring maximum growth.

Kit Contains

• 1x AirDome body
• 1x 1/4″ cross connector
• 1x 1/4″ straight connector
• 4x pieces of blue bubble pipe
• 1x 3.2′ length of airdome tubing
• Full instructions

Grow Media Guide

AutoPot Watering Systems are extremely versatile and can be used with the growing medium/substrate of your choice. Whether growing in soil, coco or hydroponically our systems exceed all expectations.

An ideal substrate for use in AutoPot systems is a 50% mix of perlite with either soil or coco. In growing trials, we have cultivated plants in a vast range of substrates from coral to denim and even pumice stone! We are now successfully trialing the systems without media for aeroponic plant growth.

Which ever substrate you decide to use make sure the blend of substrates are capillary active and have the ability to hold plenty of air within the structure. Some example of 50/50 blends are:

• Soil/Perlite
• Growstones/Coco
• Soil/Clay Pebbles
• Coco/Perlite
• Coco/Clay Pebbles
• Rockwool/Clay Pebbles