GrowControl™ GXH is a precision digital sensor transmitter, data logger, monitor and controller featuring temperature, pH, and conductivity sensors for water. Also available with oxidation reduction potential and dissolved oxygen sensor inputs
Standard large 3.5” color LCD display and 3-button interface makes this unit capable of operating stand-alone for sensor monitoring, alarms, graphing, on-site calibration, and more. Digital electronics with isolated inputs accurately read and record sensor data. The Internal memory logs 20,000+ data points per sensor for months or years of storage.
Combine the GXH controller and an AgrowDose ADi pump to form a powerful and economical automatic GDX dosing system. Operate up to a 6-part dosing pump and store up to 14 recipes for easy change-over. Learn More here!
Included With The GXH:
The GXH can be paired with the GrowControl GCX Cultivation Control System for ultimate control of your growing operation. When paired with the GrowControl GCX Controller, you not only gain the ability to control all aspects of your facility's climate and hydroponics systems, you gain the option to run your GXH system from the comfort of your home with remote access capabilities. Potential problems and issues are sent to you at an instant via text or email too, so you never have to worry!
Agrowtek also offers an easy solution for firmware updates and data logging, using the Agrowtek LX1 AgrowLink. When using the LX1, you can hook your GXH system up to your pc for even more control. Learn more here.
To make sure you set your system up how you truly like and not just how you can get it, Agrowtek systems use standard MODBUS protocols and can be controlled by MODBUS devises using Agrowtek's LX2 ModLink. Learn more here.
Stainless steel probe, 1/4" diameter x 3" with 3ft lead. Made in USA
High quality pH sensor probe for GXH transmitters. Made in USA.
Conductivity (EC) Probe
High quality electrical conductivity sensor probe for GXH transmitters. Made in USA.
Oxidation Reduction Potential (ORP) Probe
High quality ORP (Redox) sensor probe for GXH transmitters. Made in USA
Dissolved Oxygen (DO) Probe
High quality galvanic DO sensor probe for GXH transmitters. Made in USA.
pH, EC, ORP & DO sensors are equipped with “BNC” style connectors; push on and then turn to lock in place.
Temperature probes have a screw terminal block. Make the connections according to the label on the transmitter. The terminal block may be removed for easier wire installation or for service.
SXH systems require the sensors to be continuously in contact with the water in order to properly manage the dosing pumps. Probe can be located in the reservoir tank, or may be installed inline with a continuously recirculating water flow.
pH & ORP probes must remain wet to avoid damage. Do not allow probe tips to dry!
** Manifold shown sold separately. **
|Max Cable Distance||1000ft|
|Optional Interface||LCD w/3 Buttons|
|Temperature Range||-20 - 60°C|
|Temperature Accuracy||±2°C, 0.01° resolution|
|pH Accuracy||±0.02pH, 0.01pH resolution|
|Conductivity Range||0 - 5000 uS (0-2500ppm)|
|Conductivity Accuracy||±20uS, 2uS resolution|
|ORP (DO) Range||-1000 - +1000mV (0-20mg/L)|
|ORP (DO) Accuracy||±10mV, 1mV resolution|
|4-20mA Output Resolution||12 bit , 0.005mA|
Sign-up and save! Get exclusive discounts & the latest product releases.
Expert Advice Toll-Free
© 2011-2022 Hydrobuilder.com - 312 Otterson Dr STE D , Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.