Huber KISS K6 Refrigerated Heating Circulation Bath, 110 Volt

Cooling bath thermostats with insulated cooling baths are an economical solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low-level protection and adjustable over heating protection the units fulfill the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear.

Huber Kiss K6 Specs:

• KISS temperature controller
• Bright, large OLED display
• Simple operation with menu navigation
• Simultaneous display of setpoint, Tmin, Tmax and actual temperature
• Status displays for pump, cooling and heating
• Overtemperature and low level protection
• Safety class III/FL (DIN 12876)
• USB and RS232 interfaces
• Autostart function for power failure
• 3 colour versions available: grey (standard), blue, red

Huber KISS Controller

The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).

Depending on budget and application, a controller can be selected that meets the applications requirements. If only a basic functionality is required, an inexpensive model with KISS/OLÉ could be chosen.

Note: Huber recommends only using thermofluids designed for Huber units and only distributed by Huber or Huber distributors. If any aftermarket fluids are used then it has to be ensured that the fluid which will be used is compatible with the materials within the system listed at any temperatures, and the fluid documentation shows the required specifications (e.g. viscosity). The only way this is proven is by testing however if a failure occurs due to the chosen fluid then it WILL NOT be covered under warranty.

Huber can only guarantee proper operation with Huber thermofluids and therefore recommend to use the ones in above link.

If there is any failure on the unit related to a non-Huber thermofluid it WILL NOT be covered under warranty.