The MRCOOL Universal Unitary Heat Pump system is an easy-to-install, full-size air handler with a slim condenser, suitable for most 2-3 ton applications. This system is incredibly flexible, combining the ultimate in ducted comfort and easy DIY installation. The 3-ton condenser can be field converted to a 2 ton with a different dip switch setting. The quick-connect fittings on the condenser and air handler allow for easy DIY installation processes with MRCOOL's pre-charged lines, available as an accessory up to 50 feet in length. Using the same inverter technology used by the MRCOOL mini-splits, the system can run at different speeds to optimize comfort and efficiency.
What is a DC Inverter HVAC System? A DC Inverter design controls compressor motor speed while simultaneously regulating temperature. It eliminates extreme fluctuations in the operating load while extending component life. Inverter air conditioners are quiet, with lower operating costs and fewer breakdowns. They also deliver increased efficiency in comparison to previous generation technology.
The Universal indoor air handler’s modern and flexible design provides the versatility for installation in a variety of places and in multiple positions. This system adopts 24V non-communication control technology between condenser and evaporator. Because of this feature, the system can be adapted to any third-party 24V air handler or thermostat other than the included air handler. This allows for flexibility in choices and makes the indoor unit easy to replace if ever required.
As an additional accessory, this system can accommodate an auxiliary heat strip. The MRCOOL DC Inverter System takes a new approach to heating and cooling by offering an ultra-wide operating temperature range. This heating and cooling system adopts two-stage enhanced enthalpy technology to ensure strong heating capacity even at extremely low temperatures. This maintains stable system operation and heating performance at extreme temperatures.
The Universal is designed for quick installation. It is compatible with the MrCool No-Vac Quick Connect Line Set. That means the Universal DC inverter can be installed without being forced to cut, braze, or charge refrigerant lines. This can save an installation technician hours of long hard work. However, those who desire conventional installation can simply use time-tested industry techniques to install the Universal.
The MRCOOL Universal Series comes avaliable with 3 Connection Types: Pre-charged No-Vac Quick Connect Line Set (15ft, 25ft, 35ft, 50ft-Couplings also available), Sweat Braze Fitting and Flare Fitting.
The MRCOOL NO-VAC Quick connect Line Set is intended for use with the MRCOOL Universal Condensers and MRCOOL Universal Air Handlers. When one standard size NO-VAC Quick connect Line Set is not long enough, two standard No-VAC NO-VAC Quick connect Line Sets can be combined using our NO-VAC COUPLER to increase the desired length of the line sets.
A DC Inverter design controls compressor motor speed while simultaneously regulating temperature. It eliminates extreme fluctuations in the operating load while extending component life. Inverter air conditioners are quiet, with lower operating costs and fewer breakdowns. They also deliver increased efficiency in comparison to previous generation technology. Industry statistics show inverter units are already growing in popularity. The ability to adjust capacity as needed, increase efficiency, reduce energy waste, and deliver reliable comfort will make these systems the heating and air conditioning units of the future.
It is compatible with virtually all third-party thermostats, WiFi devices, and Nest. Plus, its installation profile is flexible enough that it can fit into almost any modern home mechanical design. This allows for flexibility in choices and makes the indoor unit easy to replace if ever required. Plus, should you wish to take advantage of all the benefits that the Universal condenser can provide without replacing your existing air handler, the non-communicating capability ensures that is possible. As an additional accessory, this system can accommodate an auxiliary heat strip.
Indoor Air Handler Sizing | 24,000 BTU | 36,000 BTU |
---|---|---|
Cooling Capacity | 24,000 BTU | 36,000 BTU |
SEER | Up to 20 | up to 18 |
Heating Capacity | 24,000 BTU | 36,000 BTU |
HSPF | 10 | 10 |
Indoor Noise Level | 49 dB(A) | 49 dB(A) |
Power Supply | 208-230v, 60Hz, 1 Phase | 208-230v, 60Hz, 1 Phase |
Minimum Ampacity | 5A | 5A |
Maximum Fuse | 15A | 15A |
Refrigerant (oz) | R-410 | R-410 |
Piping Size (Liquid-side, Gas-side) | Quick Connect, Flare, Weld (with Stub) | Quick Connect, Flare, Weld (with Stub) |
Outdoor Condenser Sizing | 24,000 BTU | 36,000 BTU |
---|---|---|
Cooling Capacity | 24,000 BTU | 36,000 BTU |
SEER | Up to 20 | up to 18 |
Heating Capacity | 24,000 BTU | 36,000 BTU |
HSPF | 10 | 10 |
Indoor Noise Level | 60 dB(A) | 60 dB(A) |
Power Supply | 208-230v, 60Hz, 1 Phase | 208-230v, 60Hz, 1 Phase |
Minimum Ampacity | 18A | 24A |
Maximum Fuse | 20A | 35A |
Refrigerant (oz) | R-410 | R-410 |
Piping Size (Liquid-side, Gas-side) | Quick Connect, Flare, Weld (with Stub) | Quick Connect, Flare, Weld (with Stub) |
Note: MRCOOL will not ship to Hawaii (HI). If you are in Hawaii, you will need to contact a freight forwarder.
Brand | MRCOOL |
---|---|
SKU | MDU18024036 |
Lead Time | This product ships in 1-2 business days |
ETL Listed | No |
UL Listed | No |
UPC | 810035931107 |
Prop 65 | No |
Warranty | 10 Year Limited Warranty |
Weight (lb.) | 410 |
Height (in.) | Indoor Unit: 48.2" | Outdoor Unit: 32.3" |
Width (in.) | Indoor Unit: 21.3" | Outdoor Unit: 37" |
Length (in.) | Indoor Unit: 21.3" | Outdoor Unit: 18.1" |
Air Conditioner Type | Mini-Split |
Installation Type | Quick Connect or DIY |
Air Conditioner BTU's | 36,000 BTU |
Cooling Capacity | 36,000 BTU |
Line Set Included | No |
Built-In Heat Pump | Yes |
Heating Capacity | 36,000 BTU |
SEER Rating | Up to 19 SEER |
Amps | , 1 Phase, 60Hz |
Voltage | 208/230V |
Be the first to review this product
© 2011-2024 Hydrobuilder.com - 500 Orient Street Suite 150, Chico, CA 95928 USA
All trademarks and trade names are the property of their respective trademark holders.
20.21.3